Work-hardening mechanisms of the Ti60Cu14Ni12Sn4Nb10 nanocomposite alloy
نویسندگان
چکیده
منابع مشابه
Thermally Switching On/Off the Hardening of Soaked Nanocomposite Materials
The area of smart materials is a hot topic as it allows access to adaptive/responsive materials with selfhealing, shape memory, or actuation behavior. Indeed, scientists can make all manner of materials on-scale with controllable and remarkable properties, but designing materials with mechanical adaptability is much more challenging. Although the sea cucumber might seem like an unlikely source ...
متن کاملEffect of Composition on Work Hardening Coefficient of Bismuth-Lead Binary Alloy
Abstract—In the present work, the alloy of Bismuth-lead is prepared on the basis of percentage of molecular weight 9:1, 5:5 and 1:9 ratios and grown by ZoneRefining Technique under a vacuum atmosphere. The EDAX of these samples are done and the results are reported. Micro hardness test has been used as an alternative test for measuring material’s tensile properties. The effect of temperature an...
متن کاملSURFACE HARDENING OF TUNGSTEN-BASED HEAVY ALLOY VIA PACK BORONIZING
The boronizing of a tungsten heavy alloy containing Ni and Fe as the major alloying elements were performed in the present study to increase its surface hardening. Pack cementation method was employed as a well-known, successful solid-state process for boronizing. The coating treatment was accomplished at different temperatures of 1000, 1050 and 1100°C for 6 and 9 hours. The formation of tu...
متن کاملWork hardening: past, present, and future--the work programs special interest section national work-hardening outcome study.
OBJECTIVES A review of outcome research conducted between 1982 and 1992 revealed return-to-work rates for industrial rehabilitation programs that ranged from 50% to 88%. Variations in outcome statistics appeared to reflect discrepancies in factors such as type of research design, initial characteristics of the client sample, and clients excluded from the study group. METHOD A work-hardening o...
متن کاملTHE INFLUENCE OF DRY SLIDING ON PRCIPITATION HARDENING BEHAVIORS OF Al-Cu-Si ALLOY
Abstract: Cold working performed before an aging treatment has a significant effect on size and amount of precipitate produced. This could be caused by the increase in defect density, such as vacancies and dislocations. In this research, the Al-Cu-Si alloy was solution-treated, wear-tested and then artificially aged for a period of 1–5 h. Changes in the amount of precipitate, in the lattice par...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research
سال: 2009
ISSN: 0884-2914,2044-5326
DOI: 10.1557/jmr.2009.0369