Work softening and annealing hardening of deformed nanocrystalline nickel
نویسندگان
چکیده
منابع مشابه
Cyclic strain hardening of nanocrystalline nickel
We demonstrate cyclic strain hardening and frequency-dependent fatigue life in electrodeposited nanocrystalline Ni subjected to tension–tension cyclic deformation. These observations are rationalized through mechanistic arguments based on the exhaustion of dislocation sources in the early stages of cyclic loading and on the domination of diffusive processes during later stages. 2005 Acta Materi...
متن کاملStrong strain hardening in nanocrystalline nickel.
Low strain hardening has hitherto been considered an intrinsic behavior for most nanocrystalline (NC) metals, due to their perceived inability to accumulate dislocations. In this Letter, we show strong strain hardening in NC nickel with a grain size of approximately 20 nm under large plastic strains. Contrary to common belief, we have observed significant dislocation accumulation in the grain i...
متن کاملSoftening and Hardening of ECAP Nickel under Ultrasonic Treatment
Commercially pure nickel was processed by equal channel angular pressing (ECAP) through route Bc for 12 passes to obtain an ultrafine grained (UFG) microstructure and further subjected to an ultrasonic treatment (UST) which introduced a maximum amplitude equivalent to anormal stresses of 100 MPa in a steady state regime. It was observed that the microstructure of UFG Ni can be differently alter...
متن کاملThe Anneal Hardening and Deformation Softening Behaviors of Nanocrystalline Cu-Zn Alloys
The changes in the mechanical properties and microstructure of nanocrystalline Cu-Zn alloys deformed by cryorolling during low temperature annealing and the post-process deformation were studied. The deformed Cu-Zn alloys exhibited uncommon anneal hardening and deformation softening behaviors. The degree of anneal hardening and deformation softening increased with the addition of the solute ato...
متن کاملDirect observation of Lomer-Cottrell Locks during strain hardening in nanocrystalline nickel by in situ TEM
Strain hardening capability is critical for metallic materials to achieve high ductility during plastic deformation. A majority of nanocrystalline metals, however, have inherently low work hardening capability with few exceptions. Interpretations on work hardening mechanisms in nanocrystalline metals are still controversial due to the lack of in situ experimental evidence. Here we report, by us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2008
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.3062849