X-ray diffraction analysis of cubic zincblende III-nitrides

Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis

An X-ray diffraction line will broaden considerably when steels change into martensitic structure on quenching. The results presented in this paper show that X-ray diffraction technique can be employed for a rapid and nondestructive measurement of hardness of hardened steel. Measurement on various quenched and tempered steels showed that the breadth of its diffraction peak increased with increa...

X-ray diffraction peak profile analysis of maraged Fe-Ni-Mn steels

X-ray diffraction peak profile analysis was used to identify changes in the lattice distortions during isothermal aging of Fe-10Ni-7Mn (wt. %) maraging steel. Integral peak breadths were analyzed using classical Williamson-Hall equation taking the elastic anisotropy into account. It was found that substantial lattice distortions rise during precipitation hardening which depend strongly on the s...

A pressure-jump time-resolved X-ray diffraction study of cubic-cubic transition kinetics in monoolein.

In the past two decades, the geometric pathways involved in the transformations between inverse bicontinuous cubic phases in amphiphilic systems have been extensively theoretically modeled. However, little experimental data exists on the cubic-cubic transformation in pure lipid systems. We have used pressure-jump time-resolved X-ray diffraction to investigate the transition between the gyroid Q...

X-Ray Diffraction Analysis of GaN/InGaN

Quantitative Analysis by X-ray Diffraction

Certain minerals in soil clays may be directly estimated from diffraction line intensity and the mass absorption coefficient of the sample to the radiation used. The main advantages of the method described are that no internal standards or calibration charts are required, and any diffraction line of the component to be estimated may be chosen. The results obtained compare favourably with chemic...