Yeast fuel cell: Application for desalination
نویسندگان
چکیده
منابع مشابه
Power and Fresh Water Production by Solar Energy, Fuel Cell, and Reverse Osmosis Desalination
This paper presents sizing, energy management strategy, and cost analysis for a configuration consisting of solar photovoltaic (PV) panels, fuel cell (FC) storage system, and reverse osmosis (RO) desalination technology for combined power and fresh water production. In this system, PV is the main power supply source; fuel cell is a storage system accompanied by Hydrogen production and storage d...
متن کاملNovel Auxiliary Power Unit Configuration Based On Fuel Cell Technology for Civil Aircraft Application
This paper proposes novel Fuel Cell Auxiliary Power Unit (FCAPU) for J150+ aircraft application. The primary version of APU in J150+ aircraft is a gas turbine Auxiliary Power Unit (APU) which is based on gas turbine jet engine but in the suggested FCAPU, the generated electrical power is achieved from chemical energy with higher efficiency. The Solid Oxide Fuel Cell (SOFC) technology is used to...
متن کاملA Novel Interleaved DC-DC Converter with Reduced Loss for Fuel Cell Vehicle Application
In this paper a novel four-leg interleaved DC-DC boost converter is proposed which is well suitable for fuel cell vehicles (FCV) application. The voltage stress of two switches of this converter is half of the conventional interleaved converters. Therefore, smaller and cheaper switches can be utilized. Also "on" state duration of the two of four switches are reduced in comparison with...
متن کاملCo3O4 spinel protection coating for solid oxide fuel cell interconnect application
In the present study, electrophoretic deposition (EPD) method in different electric fields (30 – 300 V / cm) was used to apply Co3O4 spinel coating to SUS 430 as SOFC interconnect. The coated and uncoated specimens were pre-sintered in air at 800 and 900 °C for 3 h followed by cyclic oxidation at 700 and 800 °C for 500 h, respectively. X-ray diffraction analysis (XRD), Scanning Electron Microsc...
متن کاملCombined Compressor-expander in Fuel Cell Application
To improve efficiency of fuel cells working on the proton exchange membrane principle, which are currently being developed for automotive applications, a supply of pressurized air at about 3 bars abs is required. This is expelled in the reaction products, mainly as water and nitrogen, at approximately 100C. The power input required to compress the air consumes approximately 20% of the cell elec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2016
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/107/1/012049