Yield symmetry and reduced strength differential in Mg-2.5Y alloy
نویسندگان
چکیده
منابع مشابه
FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...
متن کاملEffect of Mg addition on the creep and yield behavior of an Al–Sc alloy
The relationships between microstructure and strength were studied at room temperature and 300 °C in an Al–2 wt% Mg–0.2 wt% Sc alloy, containing Mg in solid-solution and Al3Sc (L12 structure) as nanosize precipitates. At room temperature, the yield strength is controlled by the superposition of solid-solution and precipitation strengthening. At 300 °C and at large applied stresses, the creep st...
متن کاملeffect of seed priming and irrigation regimes on yield,yield components and quality of safflowers cultivars
این مطالعه در سال 1386-87 در آزمایشگاه و مزرعه پژوهشی دانشگاه صنعتی اصفهان به منظور تعیین مناسب ترین تیمار بذری و ارزیابی اثر پرایمینگ بر روی سه رقم گلرنگ تحت سه رژیم آبیاری انجام گرفت. برخی از مطالعات اثرات سودمند پرایمینگ بذر را بر روی گیاهان مختلف بررسی کرده اند اما در حال حاضر اطلاعات کمی در مورد خصوصیات مربوط به جوانه زنی، مراحل نموی، عملکرد و خصوصیات کمی و کیفی بذور تیمار شده ژنوتیپ های م...
Macro-Segregation and Microstructural Characteristics in Rheo-Diecasting of a High Strength Al–4.8mass%Si–0.7mass%Mg Alloy
Rheo-diecasting with electro-magnetic stirring has been carried out to investigate macro-segregation and microstructural characteristics of a high strength AlSiMg alloy under various process conditions. The amount of initial heterogeneous nucleation and the degree of temperature uniformity in the slurry are dependent on the superheat of the melt at pouring into the slurry making vessel. The f...
متن کاملRoom temperature precipitation in quenched Al - Cu - Mg alloys : a model for the reaction kinetics and yield strength development
The microstructural evolution during low temperature ageing of two commercial purity alloys (Al1.2Cu-1.2Mg-0.2Mn and Al-1.9Cu-1.6Mg-0.2Mn at.%) was investigated. The initial stage of hardening in these alloys is very rapid, with the alloys nearly doubling in hardness during 20 h ageing at room temperature. The microstructural evolution during this stage of hardening was investigated using diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2016
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2016.08.037