YSZ/LSM Composite Cathode Deposited by Solution Precursor Plasma Spraying

نویسندگان

چکیده

In this paper, solution precursor plasma spraying (SPPS) was employed to prepare a porous YSZ/LSM composite cathode for solid oxide fuel cell (SOFC). The surface morphology and microstructure of the deposits were characterized using SEM. effect annealing treatment on SPPS examined. results showed that as-sprayed presented aggregate with size range 10–60 μm when alcohol used as solvent distance 60 mm. found be composed mainly small particles ranging from 0.2–2 μm, finely grain sizes micrometers sub-micrometers. A further at 1050 °C 2 h in air resulted continuous coating perovskite phase. polarization test demonstrated minimum polarizations 1.26 0.083 Ω·cm2 800 1000 °C, respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

In situ Particle Generation and Splat Formation During Solution Precursor Plasma Spraying of YttriaStabilized Zirconia Coatings

Thermal barrier coatings (TBCs) based on Yttria-stabilized Zirconia (YSZ) deposited by the solution precursor plasma spray (SPPS) technique have been claimed to exhibit superior durability compared to conventional plasma spraying and even electron-beam physical vapor deposition. This has been attributed to the interesting features, like vertical cracks, nanosized pores, and fine splats that are...

متن کامل

Plasma spraying of micro-composite thermal barrier coatings

The thermal barrier coatings (TBCs) by gas tunnel-type plasma spraying exhibited ceramic-composite features consisting of a host oxide matrix ceramic with an embedded second phase material. The densities of the composite TBC were found to be higher than those sprayed with 100wt% ZrO2 or Al2O3. In the coatings produced with powder mixtures of 50wt%, the embedded splats are found to have a relati...

متن کامل

Superhydrophobic Ceramic Coatings by Solution Precursor Plasma Spray

This work presents a novel coating technique to manufacture ceramic superhydrophobic coatings rapidly and economically. A rare earth oxide (REO) was selected as the coating material due to its hydrophobic nature, chemical inertness, high temperature stability, and good mechanical properties, and deposited on stainless steel substrates by solution precursor plasma spray (SPPS). The effects of va...

متن کامل

Fabrication of carbon nanotubes field emission cathode by composite plating.

Carbon nanotubes (CNTs) have high aspect ratio and have great potential to be applied as the field emission cathode because of its large field enhancement factor. In this work, a high performance carbon nanotube field emission cathode (CNTFC) was fabricated by using a composite plating method. The CNTs were purified by acid solutions and then dispersed in electrobath with nickel ions at tempera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Coatings

سال: 2022

ISSN: ['2079-6412']

DOI: https://doi.org/10.3390/coatings12030321