Ytterbium-Phosphate Glass for Microstructured Fiber Laser
نویسندگان
چکیده
منابع مشابه
Ytterbium-Phosphate Glass for Microstructured Fiber Laser
In the paper, we report on the development of a synthesis and melting method of phosphate glasses designed for active microstructured fiber manufacturing. Non-doped glass synthesized in a P₂O₅-Al₂O₃-BaO-ZnO-MgO-Na₂O oxide system served as the matrix material; meanwhile, the glass was doped with 6 mol% (18 wt%) of Yb₂O₃, as fiber core. The glasses were well-fitted in relation to optical (refract...
متن کاملMicrostructured polymer fiber laser.
A microstructured polymer optical fiber doped with Rhodamine 6G dye was fabricated and demonstrated as an optical amplifier and a fiber laser. As an amplifier, the fiber achieved a gain in excess of 30 dB. As a pulsed fiber laser, the fiber exhibited a threshold of 20 microJ, a slope efficiency of 18%, and a lifetime as high as 130,000 shots at 10 Hz. The maximum output energy was 16 microJ. Th...
متن کاملNew Generation High Power Rare-Earth-Doped Phosphate Glass Fiber and Fiber Laser
High power, high brightness fiber lasers have numerous potential commercial and military applications. These lasers offer unique flexibility as they may be coherently combined to provide a potential multi-kilowatt laser source and integrated delivery system. Fiber lasers with cladding pump designs represent a new generation of diode pumped configurations that are extremely efficient, have singl...
متن کاملYtterbium-Doped Glass Waveguide Laser Fabricated by Ion Exchange
A ytterbium-doped, glass, channel waveguide laser, fabricated by ion exchange, is reported. The 2.2-cm long device, using broad-band 4% output couplers, lased in the vicinity from 1020 to 1030 nm when pumped by a Ti : sapphire laser operating at 910 nm. A lasing threshold of 50 mW (launched pump) and a slope efficiency of 5% were measured. Device parameters, including fluorescence lifetimes, em...
متن کاملSingle-frequency 1 W hybrid Brillouin/ytterbium fiber laser.
A high-power hybrid Brillouin/ytterbium fiber laser has been demonstrated with an output power of 1 W. The laser operates in the single-frequency regime with an optical signal-to-noise ratio greater than 55 dB in a 0.1 nm bandwidth.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2014
ISSN: 1996-1944
DOI: 10.3390/ma7064723