Zirconia UV-curable colloids for additive manufacturing via hybrid inkjet printing-stereolithography
نویسندگان
چکیده
منابع مشابه
Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices.
Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-print...
متن کاملInkjet printing of nanosized silver colloids.
A water-based conducting ink, composed of well dispersed nano-silver particles, has been successfully inkjet printed using an ordinary commercial printer. The silver colloids with diameter around 50 nm were dispersed in a water and diethylene glycol cosolvent system. The 25 wt% silver ink had a viscosity of about 7.4 cP and surface tension of 33.5 dyn cm(-1) at 20 degrees C, which is appropriat...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملImage-Based Slicing and Tool Path Planning for Hybrid Stereolithography Additive Manufacturing
Hybrid stereolithograpgy (SLA) process synthesizes the laser scanning based SLA system and mask projection based SLA system. It adopts laser as the energy source for scanning the border of a 2D pattern, whereas a mask image is used to solidify the interior area. By integrating the merits of the two subsystems, the hybrid SLA process can achieve relatively high surface quality without sacrificin...
متن کاملToni Liimatta Inkjet Printing in Manufacturing of Stretchable Interconnects
Smaller form factors and dynamic applications have made flexible circuits an essential part of today’s electronic devices. Although flexible electronics is well established and constantly growing industry, this technology has its limitations. Flexible circuits can typically bend along one axis and cannot therefore conform to arbitrary shapes like for example human skin. The transition to stretc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Letters
سال: 2018
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2017.12.096