Zirconia–spinel composites. Part II: mechanical properties
نویسندگان
چکیده
منابع مشابه
Zirconia-spinel composites. Part II: mechanical properties
The mechanical properties (fracture strength, fracture toughness, and Vickers microhardness) of MgAl2O4 and x wt% ZrO2–MgAl2O4 (1 # x # 30) hot-pressed materials were measured at room temperature. Two kinds of materials, which were prepared from either ball-milled or attrited powders, were investigated. Compared with an unreinforced spinel, a twofold (or greater) increase in both strengthening ...
متن کاملCarbon nanotubes-Fe-Alumina nanocomposites. Part II: microstructure and mechanical properties of the hot-Pressed composites
Carbon nanotubes±Fe±Al2O3 massive composites have been prepared by hot-pressing the corresponding composite powders, in which the carbon nanotubes are arranged in bundles smaller than 100 nm in diameter and several tens of micrometers long, forming a web-like network around the Fe±Al2O3 grains. In the powders, the quantity and the quality of the carbon nanotubes both depend on the Fe content (2...
متن کاملEnvironmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging
The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...
متن کاملMechanical Properties of Polyaniline/carbon Nanotube Composites
TNT2005 29 August 02 September, 2005 Oviedo-Spain MECHANICAL PROPERTIES OF POLYANILINE/CARBON NANOTUBE COMPOSITES R. Sainz, A.M. Benito, M.T. Martinez, B. Corraze, O. Chauvet, J.N. Coleman, K. Ryan, W. Blau, W.K. Maser 1 Instituto de Carboquímica (C.S.I.C.), C/ Miguel Luesma Castán 4, 50018 Zaragoza, Spain LPC, IMN, Univ. Nantes, rue de la Houssinière, F-44322 Nantes, France Physics Department,...
متن کاملLaminar Tendon Composites with Enhanced Mechanical Properties.
PURPOSE A strong isotropic material that is both biocompatible and biodegradable is desired for many biomedical applications, including rotator cuff repair, tendon and ligament repair, vascular grafting, among others. Recently, we developed a technique, called "bioskiving" to create novel 2D and 3D constructs from decellularized tendon, using a combination of mechanical sectioning, and layered ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Bulletin
سال: 2000
ISSN: 0025-5408
DOI: 10.1016/s0025-5408(00)00409-8