Zn-Cr Alloy Coatings: Electrodeposition and Properties
نویسندگان
چکیده
Abstract The electrodeposition process of Zn-Cr alloy coatings under the conditions direct and pulsed current is discussed. Cr content in obtained coatings, efficiency process, surface morphology, structure wettability as a function deposition parameters, such density, were determined. good quality contained up to 20 wt.% (for current) 9 pulse current). All had typical zinc (h.c.p.) hydrophobic character. morphology changed significantly influence changes conditions.
منابع مشابه
Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (<0.5 mA/cm2), the c...
متن کاملEffect of heat treatment on structure and properties of multilayer Zn-Ni alloy coatings
Composition modulated multilayer alloy (CMMA) coatings of Zn-Ni were electrodeposited galvanostatically on mild steel (MS) for enhanced corrosion protection using single bath technique. Successive layers of Zn-Ni alloys, having alternately different composition were obtained in nanometer scale by making the cathode current to cycle between two values, called cyclic cathode current densities (CC...
متن کاملElectrodeposition of Nanostructured Magnesium Coatings
In this work, we report on the electroplating of ultrafine and uniform magnesium (Mg) films on copper (Cu) and carbon nanotube (CNT) paper substrates. By controlling the process parameters and utilizing the pulsed deposition method, the average grain size of Mg was reduced to nanodimensions. Surface pretreatment of the substrates by depositing a seed layer was found to be an efficient strategy ...
متن کاملVibrational properties of alpha- and sigma-phase Fe-Cr alloy.
Experimental and theoretical studies, of the Fe-partial phonon density of states (PDOS) for Fe52.5Cr47.5 alloy having alpha and sigma phases were carried out. The former using the nuclear resonant inelastic x-ray scattering method, and the latter with the direct one. Characteristic features of PDOS, which distinguish one phase from the other, were revealed and successfully reproduced by the the...
متن کاملDAMPING CAPACITY AND MECHANICAL PROPERTIES OF Zn-Al ALLOY CASTINGS
This paper describes damping capac i t y and mechanical p roper t ies o f Zn-8-20%A1 and Zn-8-20%Al-0.02-0.04XMg a l l o y cast ings. Zn-8-20%A1 a l l o y casti ngs show h igh damping when quenched from 573K. Small amount o f Mg a d d i t i o n t o these a l l o y cast ings lowers damping capaci ty considerably b u t e f f e c t i v e t o reduce decomposition through aging a t 423K f o r 48hrs ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Konbin
سال: 2021
ISSN: ['1895-8281', '2083-4608']
DOI: https://doi.org/10.2478/jok-2021-0003