total dissolved solid modeling; karkheh reservoir case example

نویسندگان
چکیده

the karkheh dam reservoir with a capacity of more than 5 billion cubic meter is the largest dam in iran with both agricultural and drinking usages. its hydrodynamics and water quality were modeled and simulated to analyze the total maximum daily load (tmdl) of total dissolved solids (tds). the simulation was supported with measurements of temperature and tds measurements during two years. a laterally averaged 2d model called ce-qual-w2 was used for the simulation and hypothetical low height spillways were implemented in the model to avoid drying of the cells in the river branch. the model was then calibrated successfully with an absolute mean error of 0.71Ⱐc. more importantly, vertical stratification of temperature and tds in the karkheh reservoir was reproduced by the model throughout years 2000 to 2003. the calibrated model was then used to simulate water quality response to various tds reduction scenarios. model results reveal that a 50% reduction of the tds load is required for a 40% reduction of tds in the reservoir outlet. the modeling of a complex combination of a steep and long river –reservoir system was another important achievement of this study

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

mathematical modeling on the karkheh reservoir stresses and its application to the dalpari fault

in this research, a new mathematical modeling on strength changes due to reservoir elastic stresses across the preexisting fault plane is introduced. the method has been applied to the dalpari fault, which is one of the potential seismic sources in the vicinity of the karkheh reservoir. in this method the distribution of total stress across the fault cannot be determined because the initial str...

متن کامل

Improved solid-phase spectrometry for the microdetermination of total and dissolved phosphate.

Solid-phase spectrophotometry has been improved for the determination of the total and dissolved phosphate in water. The target phosphate-P at sub-µg dm(-3) to µg dm(-3) levels in a 20-cm(3) water sample was concentrated as the molybdenum blue species to 0.06 or 0.12 cm(3) using a Sephadex G-25 within 30 min, and gel beads were introduced to a 1.5-mm or 3-mm diameter flow cell having a 10-mm li...

متن کامل

Application of Artificial Neural Network to Predict Total Dissolved Solid in Achechay River Basin

River water salinity is a significant concern in many countries, considering agricultural and drinking usages. Therefore, prediction of amount of salinity is a necessary tool for planning and management of water resources. Since Achechay River Basin in East Azerbaijan province in Iran passes through saline zones, use of the water for irrigation has become problematic. In this regard, prediction...

متن کامل

Distributed hydrological modeling of total dissolved phosphorus transport in an agricultural landscape, part II: dissolved phosphorus transport

Reducing non-point source phosphorus (P) loss to drinking water reservoirs is a main concern for New York City watershed planners, and modeling of P transport can assist in the evaluation of agricultural effects on nutrient dynamics. A spatially distributed model of total dissolved phosphorus (TDP) loading was developed using raster maps covering a 164-ha dairy farm watershed. Transport of TDP ...

متن کامل

multi reservoir optimal operation using shuffled complex evolution (sce) algorithm (case study: karkheh basin)

in recent decades, evolutionary algorithms have been applied successfully in various water resource engineering and management issue especially in optimal operation of reservoirs. in this paper, a model based on shuffled complex evolution (sce) algorithm has been developed for modeling optimal operation of complex multi reservoir system of karkheh basin. the system includes 4 different agricult...

متن کامل

Practical Case Example of Inertial MEMS Modeling with VHDL-AMS

Considering the evolution of the development of Sensors and Actuators a different learning curve between MEMS and integrated circuits is found. One of the possible solutions is to extend the use of design and simulation tools and languages design to integrate electromagnetic, thermal systems, etc...The modeling becomes a complex task, due to the fact that each component of the system can belong...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of environmental research

جلد ۳، شماره ۴، صفحات ۶۷۱-۶۸۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023