system identification based on frequency response noisy data

نویسندگان

مسعود سبحانی و احمدرضا تابش

m. sobhani and a. a. tabesh

چکیده

in this paper, a new algorithm for system identification based on frequency response is presented. in this method, given a set of magnitudes and phases of the system transfer function in a set of discrete frequencies, a system of linear equations is derived which has a unique and exact solution for the coefficients of the transfer function provided that the data is noise-free and the degrees of the numerator and denominator are selected correctly. if the data is corrupted with (bounded) noise, then the answer is no longer unique and an acceptable transfer function is one that has a frequency response with a noise bound that covers the noisy data. to find one of these acceptable results, a new performance index is defined as “the least squares distance in the coefficient space”. by minimizing this index, an initial transfer function is obtained which passes optimally through the noisy data. then, using the so-called dynamic programming technique, the noise is reduced in such a way that at each step the resulting transfer function is pushed toward one of the acceptable noise free systems. an illustrative example shows the effectiveness of the proposed algorithm.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

System Identification Based on Frequency Response Noisy Data

In this paper, a new algorithm for system identification based on frequency response is presented. In this method, given a set of magnitudes and phases of the system transfer function in a set of discrete frequencies, a system of linear equations is derived which has a unique and exact solution for the coefficients of the transfer function provided that the data is noise-free and the degrees of...

متن کامل

System Identification Based on Frequency Response Noisy Data

In this paper, a new algorithm for system identification based on frequency response is presented. In this method, given a set of magnitudes and phases of the system transfer function in a set of discrete frequencies, a system of linear equations is derived which has a unique and exact solution for the coefficients of the transfer function provided that the data is noise-free and the degrees of...

متن کامل

Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response

In this paper, nonlinear modal interactions caused by one-to-three internal resonance in a beam-mass-spring-damper system are investigated based on nonlinear system identification. For this purpose, the equations governing the transverse vibrations of the beam and mass are analyzed via the multiple scale method and the vibration response of the system under primary resonance is extracted. Then,...

متن کامل

Structural Damage Identification of Plate Structures based on Frequency Response Function and Natural Frequencies

In this paper, a structural damage identification method (SDIM) is developed for plate-like structures. This method is derived using dynamic equation of undamaged/damaged plate, in which local change in flexural rigidity is characterized utilizing a damage distribution function. The SDIM requires to modal data in the intact state and frequency response of damage state where most of vibration ba...

متن کامل

Identification of noisy response latency.

In many physical systems there is a time delay before an applied input (stimulation) has an impact on the output (response), and the quantification of this delay is of paramount interest. If the response can only be observed on top of an indistinguishable background signal, the estimation can be highly unreliable, unless the background signal is accounted for in the analysis. In fact, if the ba...

متن کامل

Recent Advances in Adaptive System Identification Based on Sparse Simulation-based Frequency-domain Data

Accurate simulation and modeling of complex multi-port LTI systems can be computationally very expensive and resource-demanding. Adaptive system identification techniques, that combine adaptive sampling and modeling algorithms, can be used to minimize the number of costly data samples, and to build accurate broadband models in a limited amount of time. This paper gives a survey of several recen...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
روش های عددی در مهندسی (استقلال)

جلد ۱۹، شماره ۱، صفحات ۱۵۷-۱۷۴

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023