improvement in mechanical properties of cellulose fibers-thermoplastic polymer composites

نویسندگان

علیرضا شاکری

سید کاظم حسینی

قنبر ابراهیمی

چکیده

0

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Rheological and Mechanical Properties of Ultra-fine Cellulose-Filled Thermoplastic Epoxy Composites

Thermoplastic epoxy resin (TPER)-based composites containing different amounts of ultra-fine cellulose (UFC) were prepared via melt compounding and injection molding. The effect of UFC loading on the mechanical properties and dynamic rheological behavior of the UFC-filled TPER composites was analyzed. The UFC-filled composites displayed higher complex viscosities than those of the neat TPER com...

متن کامل

Effects of Fibers and Fillers on Mechanical Properties of Thermoplastic Composites

Thermoplastic copolyester elastomer (TCE) and Polyoxymethylene (POM) filled polytetrafluroethylene (PTFE) composite, reinforced with short glass fiber (SGF) and different shape microfillers such as short carbon fiber (SCF), silicon carbide (SiC) and alumina (Al2O3) were prepared by melt mixing method using twin screw extruder followed by injection moulding. Mechanical properties such as tensile...

متن کامل

Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites

Reinforcement of flexible fibre reinforced plastic (FRP) composites with standard textile fibres is a potential low cost solution to less critical loading applications. The mechanical behaviour of FRPs based on mechanically bonded nonwoven preforms composed of either low or high modulus fibres in a thermoplastic polyurethane (TPU) matrix were compared following compression moulding. Nonwoven pr...

متن کامل

Mechanical properties of carbon nanotube/polymer composites

The remarkable mechanical properties of carbon nanotubes, such as high elastic modulus and tensile strength, make them the most ideal and promising reinforcements in substantially enhancing the mechanical properties of resulting polymer/carbon nanotube composites. It is acknowledged that the mechanical properties of the composites are significantly influenced by interfacial interactions between...

متن کامل

mechanical properties of non-woven polyester fibers and polymer-modified bitumen composites

blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...

متن کامل

Properties of Lignocellulosic Composites Containing Regenerated Cellulose Fibers

The aim of the paper was to examine the application of regenerated cellulose fibers as a reinforcement material in particleboard production. Single-layer, 10 mm thick panels, with the density of 800 kg/m3 were produced with addition of regenerated cellulose fibers in the range of 0 do 15% by mass during panels’ production. The mechanical and physical parameters of the produced panels were teste...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
علوم و تکنولوژی پلیمر

جلد ۱۸، شماره ۳، صفحات ۱۴۳-۱۵۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023