design, development and evaluation of electronic control valve for hydraulic pump of mf 285 tractor

نویسندگان

نوروز مراداصغرلو

گروه مکانیک بیوسیستم،واحد تبریز، دانشگاه آزاد اسلامی، تبریز، ایران

چکیده

the depth control systems used in iranian tractors are mechanical and they produce variable tillage depth in uneven field surface. in this research a rotary type electronic control valve was designed and constructed. by using this valve, electro-hydraulic tillage depth control system was developed and installed on the tractor. the control system was composed of: a depth sensor, a programmable logic controller (plc), a stepper motor with deriver, a control valve and a programmable terminal (control panel). in this system, the tillage depth was measured by utilizing a depth sensor and the control valve which is controlled by the stepper motor was used to 3-point linkage control. the laboratory results showed that the depth variations were controlled well by the developed system within ±2 cm in the steady state. also the field data indicated that the mean tillage depth of electro-hydraulic depth control system was greater than that of the mechanical depth control system with significance difference.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

design, development and evaluation of a differential lock control system for mf-399 tractor

in this research was designed a differential lock control system. the system was test and evaluated after fabrication and its accuracy and precision was determined. a field experiment with three replications was conducted to investigate the effect of gear ratio, the method of tractor movement during plowing and differential position on drive wheel slippage and fuel consumption of mf399 tractor ...

متن کامل

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...

15 صفحه اول

simulation and design of electronic processing circuit for restaurants e-procurement system

the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...

15 صفحه اول

development of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles

a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...

equipping a massey ferguson tractor (mf-285) with sensors for measuring performance parameters of tractor and implements in precision agriculture

using instrumented tractors to monitor and record spatial variations in performance parameters of tractor and implements during field operations, could improve productivity and the tractor efficiency. in the context of precision farming, this information can be used to map spatial variability of the parameters and to find the relations with changes in soil attributes (texture, moisture contents...

متن کامل

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023