physical and aerodynamic properties of pinto bean grain as affected by moisture content

نویسندگان

مرتضی صادقی

استادیار، دانشگاه صنعتی اصفهان مهدی عباسی

کارشناسی ارشد، دانشگاه صنعتی اصفهان امین اله معصومی

استادیار، دانشگاه صنعتی اصفهان

چکیده

a knowledge of physical and aerodynamic properties of agricultural crops is important and essentially required for the design and development of a crop&apos;s harvesting and post-harvesting equipments. in the present research, experiments were conducted to determine physical and aerodynamic properties of fars province pinto bean namely: kernel size and shape (length, width, thickness, projected area, geometric mean diameter and sphericity), static frictional coefficient, terminal velocity, drag coefficient as well as reynolds&apos; number needed for an assessment of kernel fluidization in air streams. the effect of moisture content on fluidization was investigated at three moisture levels of 8, 12 and 16% (w.b.). the static coefficient of friction was found out by use of an inclined surface covered with glass, wood, galvanized iron sheet and plexiglass materials. aerodynamic tests were carried out through fluidization method at three kernel size groups and in nine replications. all the measured and computed physical and aerodynamic characteristics were significantly affected by moisture content (p < 0.01). the surface material significantly affected the static frictional coefficient, the maximum of which (0.44) belonged to the galvanized iron surface. results also indicated that for all surface materials, the static coefficient of friction increased linearly by increase in moisture content (r2 higher than 0.83). the mean values of terminal velocity, drag coefficient and reynolds&apos; number were recorded as 13.79 m/s, 0.739 and 8438.88, respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

physical and mechanical properties of alfalfa grind as affected by particle size and moisture content

physical and mechanical properties of alfalfa (medicago sativa, l.) grind are required for optimum design of equipment used in transporting, processing and storage of the material. this study was conducted to determine the effect of particle size (2.38, 3.36 and 4.76 mm) and moisture content (8, 9.3 and 11% wb) on some physical and mechanical properties of alfalfa grind. these properties includ...

متن کامل

Original article Textural modification of soya bean/corn extrudates as affected by moisture content, screw speed and soya bean concentration

A Clextral BP-10 (type BC45) co-rotating twin-screw extruder was used for texture modification of extrudates. Dry materials were mixed in a mixer for 15 min at low speed before extrusion. Moisture content 21–23% and addition of soya bean flour (0–40%) showed significant influences on the texture of the extrudates. Addition of soya bean flour in the range from 0 to 40% increased the diametrical ...

متن کامل

Physical rice grain quality as affected by biophysical factors and pre-harvest practices

Varietal purity and proportions of grains with brown spots, fissured grains, chalky grains andwhole grains in a rice sample are important grain quality attributes influencing consumers'preference and price but little information exist on how these grain quality attributes are affectedby biophysical factors and pre-harvest practices. Several authors have studied in isolation theeffect of biophys...

متن کامل

Photosynthetic Pigments Content and Grain Quality of Triticale as Affected by Mycorrhiza and Zeolite Enriched Manure Compost

In order to study the effect of mycorrhiza inoculation and zeolite-enriched manure compost on photosynthetic pigments content and qualitative properties of triticale grain, a factorial experiment in a completely randomized complete block design with four replications were conducted at Research Field of Agricultural Sciences and Natural Resources University of Khouzestan during 2016-2017 growing...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مهندسی بیوسیستم ایران

جلد ۴۱، شماره ۲، صفحات ۱۴۵-۲۹۶

کلمات کلیدی
a knowledge of physical and aerodynamic properties of agricultural crops is important and essentially required for the design and development of a crop&apos;s harvesting and post harvesting equipments. in the present research experiments were conducted to determine physical and aerodynamic properties of fars province pinto bean namely: kernel size and shape (length width thickness projected area geometric mean diameter and sphericity) static frictional coefficient terminal velocity drag coefficient as well as reynolds&apos; number needed for an assessment of kernel fluidization in air streams. the effect of moisture content on fluidization was investigated at three moisture levels of 8 12 and 16% (w.b.). the static coefficient of friction was found out by use of an inclined surface covered with glass wood galvanized iron sheet and plexiglass materials. aerodynamic tests were carried out through fluidization method at three kernel size groups and in nine replications. all the measured and computed physical and aerodynamic characteristics were significantly affected by moisture content (p < 0.01). the surface material significantly affected the static frictional coefficient the maximum of which (0.44) belonged to the galvanized iron surface. results also indicated that for all surface materials the static coefficient of friction increased linearly by increase in moisture content (r2 higher than 0.83). the mean values of terminal velocity drag coefficient and reynolds&apos; number were recorded as 13.79 m/s 0.739 and 8438.88 respectively.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023