stress intensity factors for an interior griffith crack opened by heated wedge in a strip whose edges are normal to crack axis

نویسندگان
چکیده

after second world war, we have seen a very rapid development of thermoelasticity stimulated by various engineering sciences. as we know, structures behave in different fashion under climate variation and the most responsible factor for these variations is heat which falls through and causes deformation of the body. a considerable progress in the field of aircraft and machine structures, mainly with gas and steam turbine and the emergence of new topics in chemical and nuclear engineering, have given rise to numerous problems in which thermal stresses play an important and frequently even a primary role. the concern of the present paper is the problem of an interior griffith crack opened by heated wedge in a strip whose edges are normal to crack axis and the medium is assumed to be homogenous and isotropic. under plane strain condition the closed form expressions for the stress intensity factors and the crack shape are obtained by use of fourier transform technique. two special cases of heat distributions are discussed in the end when wedge geometry is prescribed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

STRESS INTENSITY FACTORS FOR AN INTERIOR GRIFFITH CRACK OPENED BY HEATED WEDGE IN A STRIP WHOSE EDGES ARE NORMAL TO CRACK AXIS

After second world war, we have seen a very rapid development of Thermoelasticity stimulated by various engineering sciences. As we know, structures behave in different fashion under climate variation and the most responsible factor for these variations is heat which falls through and causes deformation of the body. A considerable progress in the field of aircraft and machine structures, mainly...

متن کامل

Scattering of SH-waves by a Griffith crack in a long strip at asymmetric position

The scattering of SH-waves by a Griffith crack in an infinitely long elastic strip situated at an asymmetric position has been analyzed. Applying Fourier transform, the mixed boundary value problem has been reduced to the solution of dual integral equations which finally has been reduced to the solution of a Fredholm integral equation of second kind. The numerical values of stress intensity fac...

متن کامل

Moving Griffith crack in an orthotropic strip with punches at boundary faces

Integral transform technique is employed to solve the elastodynamic problem of steadystate propagation of a Griffith crack centrally situated along the midplane of orthotropic strip of finite thickness 2h and subjected to point loading with centrally situated moving punches under constant pressure along the boundaries of the layer. The problem is reduced to the solution of a pair of simultaneou...

متن کامل

Stress intensity factors for a crack in front of an inclusion

A stable numerical algorithm is presented for an elastostatic problem involving a crack close to and in front of an inclusion interface. The algorithm is adaptive and based on an integral equation of Fredholm’s second kind. This enables accurate analysis also of rather difficult situations. Comparison with stress intensity factors of cracks close to straight infinite bimaterial interfaces are m...

متن کامل

Estimation of Stress Intensity Factors from Near Crack Tip Field

All current experimental methods for determination of stress intensity factors are based on the assumption that the state of stress near the crack tip is plane stress. Therefore, these methods rely on strain and displacement measurements made outside the near crack tip region affected by the three-dimensional effects or by process zone. In this paper, we develop and validate an experimental pro...

متن کامل

Numerical Determination of Crack Opening and Closure Stress Intensity Factors

present work shows the numerical determination of fatigue crack opening and closure stress intensity factors of a C(T) specimen under variable amplitude loading using a finite element method. A half compact tension C(T) specimen, assuming plane stress constraint was used by finite element method covering the effects in two-dimensional (2D) small scale yielding models of fatigue crack growth und...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of sciences islamic republic of iran

جلد ۱۲، شماره ۴، صفحات ۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023