analytical solution for stress field and intensity factor in cstbd under mixed mode conditions

نویسندگان

najaf ali ghavidel

hosein memarian

soheil mohamadi

mohammad heydarizadeh

چکیده

considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. there are two direct and indirect methods tomeasure tensile strength. since direct methods always encompass difficulties in test setup, indirectmethods, specifically the brazilian test, have often been employed for tensile strength measurement.tensile failure is technically attributed to crack propagation in rock. fracture mechanics hassignificant potential for the determination of crack behaviour as well as propagation pattern. to applybrazilian tests, cracked disc geometry has been suggested by the international society for rockmechanics isrm. accordingly, a comprehensive study is necessary to evaluate stress field and stressintensity factor (sif) around the crack in the centre of the specimen. in this paper, superpositionprinciple is employed to solve the problem of cracked straight-through brazilian disc (cstbd), usingtwo methods of dislocation and complex stress function. stress field and sif in the vicinity of thecrack tip are then calculated. with the proposed method, the magnitude of critical load for crackinitiation in structures can be predicted. this method is valid for any crack of any arbitrary length andangle. in addition, numerical modelling has been carried out for the brazilian disc. finally, theanalytical solution has been compared with numerical modelling results showing the same outcomefor both methods.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analytical Solution for Stress Field and Intensity Factor in CSTBD under Mixed Mode Conditions

Considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. There are two direct and indirect methods tomeasure tensile strength. Since direct methods always encompass difficulties in test setup, indire...

متن کامل

An Analytical Solution for Inverse Determination of Residual Stress Field

An analytical solution is presented that reconstructs residual stress field from limited and incomplete data.  The inverse problem of reconstructing residual stresses is solved using an appropriate form of the airy stress function.  This function is chosen to satisfy the stress equilibrium equations together with the boundary conditions for a domain within a convex polygon.  The analytical solu...

متن کامل

Threshold stress intensity factor and crack growth rate prediction under mixed-mode loading

A new mixed-mode threshold stress intensity factor is developed using a critical plane-based multiaxial fatigue theory and the Kitagawa diagram. The proposed method is a nominal approach since the fatigue damage is evaluated using remote stresses acting on a cracked component rather than stresses near the crack tip. An equivalent stress intensity factor defined on the critical plane is proposed...

متن کامل

Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings

In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...

متن کامل

Mixed-Mode Stress Intensity Factors for Surface Cracks in Functionally Graded Materials Using Enriched Finite Elements

Three-dimensional enriched finite elements are used to compute mixed-mode stress intensity factors (SIFs) for three-dimensional cracks in elastic functionally graded materials (FGMs) that are subject to general mixed-mode loading. The method, which advantageously does not require special mesh configuration/modifications and post-processing of finite element results, is an enhancement of previou...

متن کامل

Photoelastic Determination of Mixed Mode Stress Intensity Factors

A two dimensional finite model with inclined crack at different crack angles are being analyzed in mixed mode condition using photo elasticity method for the determination of Stress Intensity Factors. The well-known Sih’s equation and three points deterministic approach is used for the determination of stress intensity factors. The effects of biaxial load factor, crack angle, size factors were ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
int. journal of mining & geo-engineering

ناشر: university of tehran faculty of engineering

ISSN 2345-6930

دوره 48

شماره 1 2014

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023