application of truncated gaussian simulation to ore-waste boundary modeling of golgohar iron deposit

نویسندگان

omid asghari

ut fatemeh amirpoursaeid

simulation and data processing laboratory, school of mine engineering, college of engineering, university of tehran

چکیده

truncated gaussian simulation (tgs) is a well-known method to generate realizations of the ore domains located in a spatial sequence. in geostatistical framework geological domains are normally utilized for stationary assumption. the ability to measure the uncertainty in the exact locations of the boundaries among different geological units is a common challenge for practitioners. as a simple and informative example of such a boundary, one can consider the boundary between ore and waste materials in an ore deposit. this boundary addresses the percentages of the ore and the waste, and also affect the future economy of mine and all precedent mine designs and mine plans. deterministic approaches, based on interpretation of geological phenomenon, provide just one scenario of ore-waste variation, and do not offer a model for uncertainty of boundaries. on the other hand, geostatistical simulations, based on stochastic models, can measure the uncertainty of such a boundary. through different techniques for spatial simulation of the categorical data (geological domains) truncated gaussian simulation has been proved to be versatile when geological units have sequential geometries and/or there are few number of indicators (ore and waste). this study addresses the application of tgs for conditional simulation of ore and waste domains in golgohar iron ore deposit. separation of the ore and waste domains has affected the ore tonnage estimation and resource evaluation. various simulations can be considered as the spatial realizations of ore and waste. tgs can generate realizations of the domains and measure the uncertainty of ore-waste boundary. the accuracy of result has been checked through performance evaluation section and different scenarios (e.g. best, average and worst). the best scenario is the one with the most accuracy that is calculated from confusion matrix. the scenario no. 44 with 96 million cubic meters tonnage has an accuracy over 86 percent that is proposed as the best scenario for future mine design and planning.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of truncated gaussian simulation to ore-waste boundary modeling of Golgohar iron deposit

Truncated Gaussian Simulation (TGS) is a well-known method to generate realizations of the ore domains located in a spatial sequence. In geostatistical framework geological domains are normally utilized for stationary assumption. The ability to measure the uncertainty in the exact locations of the boundaries among different geological units is a common challenge for practitioners. As a simple a...

متن کامل

The Application of Artificial Neural Networks to Ore Reserve Estimation at Choghart Iron Ore Deposit

Geo-statistical methods for reserve estimation are difficult to use when stationary conditions are not satisfied. Artificial Neural Networks (ANNs) provide an alternative to geo-statistical techniques while considerably reducing the processing time required for development and application. In this paper the ANNs was applied to the Choghart iron ore deposit in Yazd province of Iran. Initially, a...

متن کامل

Determination of Ore/Waste Boundary Using Indicator Kriging, Case Study: Choghart Iron Mine of Iran

Estimation of ore reserves is one of the most critical aspects of mining geology. The accurate assessment of the tonnage and grade of run of mine may be the difference between a healthy profitable operation and an expensive early mine closure. The first step in ore reserve estimation is to determine the boundary of ore body or ore/waste contacts. This paper presents a specific mining applicatio...

متن کامل

environmental effects of gol-e-gohar iron ore mine on groundwater of the area

gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...

Application of stochastic programming for iron ore quality control

Stockpiling and blending play a major role in maintaining the quantity and quality of the raw materials fed into processing plants, especially the cement, iron ore and steel making, and coal-fired power generation industries that usually require a much uniformed feed. Due to the variable nature of such materials, they even come from the same source and the produced ores or concentrates are seld...

متن کامل

The effect of estimation methods on multifractal modeling for mineralized zone delineation in the Dardevey iron ore deposit, NE Iran

The purpose of this study is to identify the effect of Ordinary Kriging (OK) and Inverse Distance Weighted (IDW) estimation methods for the delineation of mineralized zones based on subsurface data using concentration–volume (C–V) multifractal modeling in the Dardevey iron ore deposit, NE Iran. Variograms and anisotropic ellipsoid were generated for the Fe distribution by the above estimation m...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of mining and geo-engineering

جلد ۵۰، شماره ۲، صفحات ۱۷۵-۱۸۱

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023