generalized warping in flexural-torsional buckling analysis of composite beams

نویسندگان

amalia argyridi

institute of structural analysis & aseismic research school of civil engineering national technical university of athens zografou campus athens 157 80, greece evangelos sapountzakis

institute of structural analysis & aseismic research school of civil engineering national technical university of athens zografou campus athens 157 80, greece

چکیده

the finite element method is employed for the flexural-torsional linear buckling analysis of beams of arbitrarily shaped composite cross-section taking into account generalized warping (shear lag effects due to both flexure and torsion). the contacting materials, that constitute the composite cross section, may include a finite number of holes. a compressive axial load is applied to the beam. the influence of nonuniform warping is considered by the usage of one independent warping parameter for each warping type, i.e. shear warping in each direction and primary as well as secondary torsional warping, multiplied by the respective warping function. the calculation of the four aforementioned warping functions is implemented by the solution of a corresponding boundary value problem (longitudinal local equilibrium equation). the resulting stress field is corrected through a shear stress correction. the equations are formulated with reference to the independent warping parameters additionally to the displacement and rotation components.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Generalized Warping In Flexural-Torsional Buckling Analysis of Composite Beams

The finite element method is employed for the flexural-torsional linear buckling analysis of beams of arbitrarily shaped composite cross-section taking into account generalized warping (shear lag effects due to both flexure and torsion). The contacting materials, that constitute the composite cross section, may include a finite number of holes. A compressive axial load is applied to the beam. The...

متن کامل

Flexural -Torsional Buckling Tests of Cold-Formed Lipped Channel Beams Under Restrained Boundary Conditions

In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...

متن کامل

Flexural-torsional stability of sandwich tapered I-beams with a functionally graded porous core

The present research deals with the flexural-torsional buckling analysis of sandwich web and/or flanges tapered doubly-symmetric I-beam. All section walls are composed of two metal face layers and a functionally graded (FG) porous core. It is assumed that the material properties of the porous core vary gradually in the longitudinal direction according to the simple power-law function considerin...

متن کامل

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Torsional-Flexural Buckling of Unevenly Battened Columns under Eccentrical Compressive Loading

In this paper, an analytical model is developed to determine the torsional-flexural buckling load of a channel column braced by unevenly distributed batten plates. Solutions of the critical buckling loads were derived for three boundary cases using the energy method in which the rotating angle between the adjacent battens was presented in the form of a piecewise cubic Hermite interpolation (PCH...

متن کامل

Lateral-torsional buckling resistance of cold-formed high strength steel rectangular hollow beams

Hollow sections have been widely used for steel structures. Applications of High Strength Steel (HSS) on cold-formed hollow sections lead to thinner and lighter structures. This paper presents numerical investigations on the lateral-torsional buckling resistance of the cold-formed high strength steel rectangular hollow beam. Results from finite element analysis using Abaqus software are compare...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of applied and computational mechanics

جلد ۲، شماره ۳، صفحات ۱۵۲-۱۷۳

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023