a new approach to aim maximum heat recovery in plate-fin heat exchanger with constant heat transfer characteristics
نویسندگان
چکیده
the purpos of this paper is to aim the maximum heat transfer rate in a plate-fin heat exchanger with a constant volume and a contant surface area at a prescribed pressure drop. this paper propose a method for design a plat-fin heat exchanger in which a maximum pressure drop occurs at a constant volume and surface are. in this paper as a case study, a preheater of a gas turbine which is a plate-fin type is used and prposed method is implemented.
منابع مشابه
Heat Transfer Analysis of Nanofluid in a Sine Wave Plate Heat Exchanger
Heat transfer is one of the most critical processes in the industry, and by increasing the efficiency of the heat exchanger, energy consumption of systems will be reduced. Very tiny particles in nanoscale dimensions, when uniformly dispersed and stably suspended in the base fluid, efficiently improve the thermal properties of the base fluid. With the help of nanofluids, the heat transfer rate i...
متن کاملHeat transfer enhancement in a spiral plate heat exchanger model using continuous rods
This study presents an innovative and simple way to increase the rate of heat transfer in a spiral plate heat exchanger model. Several circular cross-section rods, as continuous vortex generators, have been inserted within the spiral plate heat exchanger in the cross-stream plane. The vortex generators are located at various azimuth angles of α=30◦, 60◦, 90◦, and 120◦ with non-dimensional diame...
متن کاملAnalysis of Heat Transfer Enhancement in Spiral Plate Heat Exchanger
In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...
متن کاملWater thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger
Heat and mass transfer, in this paper, is considered in one-row heat exchanger, that fins are hotter than air flow and water is added to fins. Related governing equations are derived by analyzing a two-dimension model in a unique cell of a heat exchange. These equations are numerically solved by finite difference method. Heat transfer and efficiency under partially wet surface are calculated by...
متن کاملnumerical investigation of heat transfer and pressure drop in a plate heat exchanger with chevron plates
in the present study, turbulent flow in channels of a plate heat exchanger with corrugated chevron plates has been simulated numerically using the commercial cfd package, fluent. unstructured mesh is used for discretizing the computational domain and simple algorithm is utilized to solve the pressure and velocity equations. there is a wide selection of different plate heat exchangers within the...
متن کاملCalculation of Heat Transfer Coefficient of MWCNT-TiO2 Nanofluid in Plate Heat Exchanger
The objective of the present study is the synthesis of MWCNT-TiO2 hybrid nanostructures by solvothermal synthesis method with TiCl4 as precursor. The heat transfer enhancement due to the use of MWCNT-TiO2 nanofluid was investigated. As-prepared hybrid materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that MWCNTs were uniformly dec...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
تحقیقات مکانیک کاربردیجلد ۷، شماره ۴، صفحات ۳-۱۲
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023