modeling of wind energy conversion system including dfig for distributed generation studies
نویسندگان
چکیده
a detailed model of wind power station, including double fed induction generator, dfig is presented in this paper. two control mechanisms are included in the model. the inner control system uses stator flux oriented control for the rotor side converter and grid voltage vector control for the grid side converter. the outer control system is used for wind turbine pitch angle. pscad/emtdc is used for the simulation. the simulation model is used to investigate the performance of controllers under wind speed variations, short circuit at the grid side and dynamics of active power demand.
منابع مشابه
Modeling of Wind Energy Conversion System Including DFIG for Distributed Generation Studies
A detailed model of wind power station, including Double Fed Induction Generator, DFIG is presented in this paper. Two control mechanisms are included in the model. The inner control system uses stator flux oriented control for the rotor side converter and grid voltage vector control for the grid side converter. The outer control system is used for wind turbine pitch angle. PSCAD/EMTDC is us...
متن کاملMPPT for DFIG Fed Stand Alone Wind Energy Conversion System
This paper deals with a control scheme to extract maximum power from the wind energy conversion system (WECS) using Maximum Power Point Tracking Algorithm (MPPT) from a Doubly Fed Induction Generator (DFIG). In order to ensure the continuous supply of power, battery backup is established. The control scheme for standalone system includes the charge controller circuit for battery bank and pitch ...
متن کاملDynamic Modeling and Control of DFIG for Wind Energy Conversion System Using Feedback Linearization
This paper presents a dynamic modeling and control of doubly fed induction-generator (DFIG) based variable speed wind-turbine. The dynamic model of DFIG is incorporated with all system components which provide simple design and controls. The penetration of wind power is increasing into electrical networks, which necessitates more comprehensive studies to recognize the interaction between the wi...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملControl of a wind energy conversion system equipped by a DFIG for active power generation and power quality improvement
The aim of this paper is to improve the reactive power compensation and active filtering capability of a Wind Energy Conversion System (WECS). The proposed algorithm is applied to a Doubly Fed Induction Generator (DFIG) with a stator directly connected to the grid and a rotor connected to the grid through a back-to-back AC-DC-AC PWM converter. The control strategy of the Rotor Side Converter (R...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی برق و الکترونیک ایرانجلد ۷، شماره ۲، صفحات ۵۱-۶۴
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023