an anisotropic axisymmetric model for wrought magnesium alloys
نویسندگان
چکیده
the global environmental concerns have put the light weighting of structures on the fore front of the research in transportation industry. among other light weight alloys, the transportation industry is considering magnesium intensive light body-in-white structure in automotive applications. although the research in modeling technique areas is very active, a suitable practical model mimicking the severe asymmetry and anisotropy of magnesium is lacking. loading-unloading behavior of wrought magnesium alloy over a wide range of strain has been obtained experimentally and is presented here. it is shown that while the material behaves elastically isotropic, it shows a different yield in tension and compression with a high bauschinger effect. this is attributed to the magnesium multiple deformation mechanisms of slip, extension/contraction twinning, and de-twinning resulting in an asymmetric yield and a direction dependent performance. up-to-date there are no plasticity model commercially available that can capture these behavior. therefore, it is necessary to develop a simple and efficient model that can serve as benchmarking tool for plasticity models evaluation. such model is presented in this paper. the axisymmetric elastic-plastic model of jahed and dubey (1997) has been extended to wrought magnesium alloys. an asymmetric yield function is adapted and the obtained behavior in loading and unloading is directly incorporated in the solution process. it is shown that the results are significantly different from isotropic assumptions.
منابع مشابه
an application of equilibrium model for crude oil tanker ships insurance futures in iran
با توجه به تحریم های بین المملی علیه صنعت بیمه ایران امکان استفاده از بازارهای بین المملی بیمه ای برای نفتکش های ایرانی وجود ندارد. از طرفی از آنجایی که یکی از نوآوری های اخیر استفاده از بازارهای مالی به منظور ریسک های فاجعه آمیز می باشد. از اینرو در این پایان نامه سعی شده است با استفاده از این نوآوری ها با طراحی اوراق اختیارات راهی نو جهت بیمه گردن نفت کش های ایرانی ارائه نمود. از آنجایی که بر...
A Study of the Effects of Processing and Alloying on the Microstructure and Deformation Behavior of Wrought Magnesium Alloys
Lightweight magnesium (Mg) alloys are being progressively incorporated into structural applications where weight reduction is an important design priority. Higher strength and better formability can be achieved by the development of new processing methods and new alloy composition, which entail a comprehensive understanding of the processing-microstructure-property relationship and deformation ...
متن کاملFormability of Magnesium Alloys
The paper is focused on issues of processing of non-ferrous metals in practice, namely on Mg-Al-Zn based on magnesium alloys with graded Al contents. It is well known that forming of these alloys is difficult since this feature is caused by their crystallographic arrangement. Nevertheless, application of appropriate methods of forming, such as e.g. some of SPD processes, makes it possible to ac...
متن کاملMagnesium Wrought and Fabricated Products Yesterday, Today, and Tomorrow
The developers of magnesium metal production were always interested in methods of producing alloys and products. Casting was the first major development in the production of structural parts, but rolling, forging and extrusion closely followed it. This paper reviews the tremendous historical developments in wrought products during the 1930’s and 1940’s. At the peak of magnesium production for W...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۵، شماره ۴، صفحات ۷-۱۱
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023