torque ripple minimization in pm synchronous motors using tooth shape optimization
نویسندگان
چکیده
several approaches are available to reduce pulsating torque components in permanent magnet motors. one of the known techniques is stator tooth shape modifications. this paper presents an integrated algorithm applicable for tooth shape optimization of permanent magnet motors. this method focuses on the reduced basis technique, finite element analysis and taguchi method and is conducted on tooth shape optimization of a 3-phases radial flux pmsm motor.
منابع مشابه
Torque Ripple Minimization in PM Synchronous Motors Using Tooth Shape Optimization
Several approaches are available to reduce pulsating torque components in permanent magnet motors. One of the known techniques is stator tooth shape modifications. This paper presents an integrated algorithm applicable for tooth shape optimization of permanent magnet motors. This method focuses on the reduced basis technique, finite element analysis and Taguchi method and is conducted on tooth ...
متن کاملAdaptive Control for Torque Ripple Minimization in PM Synchronous Motors
This paper presents two methods for designing special purpose controllers for permanent magnet synchronous motor. The main target of the designed controllers is to reduce torque ripples of this type of motors. The first proposed adaptive method is based on two loop controllers (current controller and speed controller) in addition to using space vector pulse width modulation to maximize fundamen...
متن کاملTorque Ripple Minimization by Tracking Non-linear Control of Pm Synchronous Motors
Nowadays, Permanent Magnet Synchronous Motors have been considered as one of the best ones used in industry due to their high efficiency, low torque ripples and well known dynamical operation. Indeed, it is expected that this type of motors can be used more frequently. In this paper, a special type of these motors, the surface mounted PM motor, is considered. After introducing the mathematical ...
متن کاملTorque Ripple Minimization in Hybrid Stepper Motors Using Acceleration Measurements ?
Hybrid stepper motors (HSMs) are commonly used in many cost-sensitive industrial and consumer applications. With the use of micro-stepping techniques, they could theoretically achieve a very high resolution in positioning of mechanical loads, even without position sensors. However, it is well known that HSMs are affected by a large torque ripple, due to cogging and phase unbalancing. This, in t...
متن کاملTorque Ripple Minimization, Suppress Harmonics, and Noise of Brushless Pm Synchronous Motors Derived by Field Oriented Control
Conventional field oriented control for brushless PM synchronous motor depends upon mathematical model so the parameters variations, noise, electromagnetic interface, non-sinusoidal flux and harmonics in the motor or in power converter will cause performance deteriorating of the drive system. They are causing speed oscillations, ripples in torque, ripples in current and an increase the total ha...
متن کاملAdaptive torque-ripple minimization in switched reluctance motors
This paper addresses torque-ripple reduction in current-fed switched reluctance motors (SRMs). Ripple-free torque production in SRMs requires an accurate model that is often too complex for practical implementation. The algorithm proposed here combines the use of a simplified model with adaptation. Explicitly, it includes dynamic estimation of low harmonics of the combined unknown load torque a...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۳، شماره ۲، صفحات ۲۷-۳۱
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023