effect of multiple adhesive coating on microshear bond strength to primary tooth dentin.

نویسندگان

beheshteh malekafzali associate professor, department of pedodontics, shahid beheshti university of medical science dental school, tehran, iran.

amir ghasemi

hassan torabzadeh

reza hamedani

چکیده

multiple adhesive coating is a controversial topic, especially in primary dentition that should be clarified. we evaluated the effect of multiple consecutive adhesive resin coatings on the microshear bond strength (μsbs) of composite resin to primary tooth dentin utilizing a filled (adper single bond plus) and an unfilled (adper single bond) adhesive resin.thirty extracted primary canines were randomly allocated into two groups based on the adhesive used. dentin occlusal surfaces were exposed and further polished on 400, 600 and 800-grit silicon-carbide paper. the surfaces were divided into two halves in the labial-lingual orientation. after etching, the adhesives were used either in double coats, or four coats on the halves of the same tooth followed by air evaporation for each layer and finally light curing. cylinders of composite were bonded to the dentin surfaces. after 24 h shear bond testing was evaluated by bisco tensile tester. anova, student t test and paired t test were used for statistical analysis.the mean (standard deviation) for double coats or four coats in single bond were 31.99 (2.94) and 30.25 (2.69), while they were 29.18 (3.35) and 31.26 (2.07) in single bond plus, respectively. no significant differences were found between the double coated specimens and those receiving four coatings with both adhesives (p>0.05). micro sbs values of single bond double coated specimens were significantly higher than single bond plus (p=0.02). in four-coated specimens, there were no significant differences between single bond and single bond plus (p=0.26).applying four coats of adhesive did not improve the μsbs to primary tooth dentin.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Multiple Adhesive Coating on Microshear Bond Strength to Primary Tooth Dentin

OBJECTIVE Multiple adhesive coating is a controversial topic, especially in primary dentition that should be clarified. We evaluated the effect of multiple consecutive adhesive resin coatings on the microshear bond strength (μSBS) of composite resin to primary tooth dentin utilizing a filled (Adper Single Bond Plus) and an unfilled (Adper Single Bond) adhesive resin. MATERIALS AND METHODS Thi...

متن کامل

Effect of adhesive layers on microshear bond strength of nanocomposite resin to dentin

BACKGROUND Bond strength of adhesive layer can absorb unwanted stresses of polymerization shrinkage in composite resin restorations; increased microshear bond strength can prevent failure of restoration materials, the purpose of this study was to evaluate the effect of adhesive layers on microshear bond strength of nanocomposite resin to dentin. MATERIAL AND METHODS Two different types of adh...

متن کامل

Microtensile and Microshear Bond Strength of an Antibacterial Self-Etching System to Primary Tooth Dentin

OBJECTIVES The aim of this study was to test the hypothesis that the bonding ability of antibacterial bonding system to primary dentin was not different from the parental material which did not contain any antibacterial component. METHODS Extracted human non-carious primary molars were ground to expose the coronal dentin, and then randomly divided into two experimental groups: treatment with ...

متن کامل

Effect of tooth age on bond strength to dentin.

This in vitro study evaluated the effect of tooth age on the tensile bond strength of Prime & Bond NT adhesive system to dentin. Human third molars from the five age groups were analyzed: A- 17 to 20yrs, B- 21 to 30yrs, C- 31 to 40yrs, D- 41 to 50yrs and E- 51 to 63yrs. The occlusal enamel was removed using a diamond saw under water cooling and the dentin surface was wet-ground with 600-grit Si...

متن کامل

Microshear bond strength according to dentin cleansing methods before recementation

PURPOSE THE AIM OF THIS STUDY WAS TO DETERMINE THE EFFICIENCY OF ERBIUM, CHROMIUM: Yttrium-Scandium-Gallium-Garnet laser in different output powers for removing permanent resin cement residues and therefore its influence on microshear bond strength compared to other cleaning methods. MATERIALS AND METHODS 90 extracted human molars were sectioned in 1 mm thickness. Resin cement was applied to ...

متن کامل

Effect of salivary contamination on shear bond strength of three different dentin adhesive systems

Effect of salivary contamination on shear bond strength of three different dentin adhesive systems Dr. H. Kermanshah* - Dr. H. Haj miragha** - Dr. SH. Gatoeizadeh*** *- Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry – Tehran University / Medical Sciences. **- Assistant Professor of Fixed Prosthodontics Dept. & Dental Research Center - Faculty of Dentistry – Tehran Unive...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of dentistry, tehran university of medical sciences

جلد ۱۰، شماره ۲، صفحات ۱۶۹-۷۴

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023