clarification of sour orange juice by ultrafiltration: optimization of permeate flux and fouling resistances using response surface methodology

نویسندگان

mohammadmahdi seyedabadi

mahdi kashaninejad

alireza sadeghi mahoonak

yahya maghsoudlou

چکیده

the turbidity of sour orange juice after juice extraction affects on quality, shelf-life and concentration of juice. therefore, juice clarification is an important operation in the fruit processing industry. the goal of this study was evaluating the effect of membrane operation parameters including pressure (120-220 kpa) and temperature (25-35 ºc) on the permeate flux and hydraulic resistance of sour orange juice during membrane clarification. response surface methodology (rsm) was used to optimizing the operating parameters. results of the experiments showed that the permeate flux was raised with increasing of temperature, but total hydraulic resistance (rt), concentration polarization resistance (rcp) and gel layer resistance (rg) was decreased in mentioned condition. the permeate flux, membrane resistance (rm), rt, rcp and fouling index was raised with increasing in pressure. the rm and fouling index are showed different behavior depending on temperatures level. results of process optimization indicated that the best conditions to maximize of permeate flux, and to minimize of fouling index and rt achieved at 35 ºc and 120 kpa for a maximum desirability of 0.761.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Intelligent Modeling of Permeate Flux during Membrane Clarification of Pomegranate Juice

Background and Objectives: One of the problems in juice membrane clarification is the accumulation and deposition of rejected compounds on membrane surfaces or inside its pores which results in a membrane fouling. Materials and Methods: Several parameters can have influence on fouling in one hand and prediction of juice permeates flux during the membrane processing is of importance in indust...

متن کامل

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Oxidative Desulfurization of Sour Gas Condensate and Optimization of Parameters with Response Surface Methodology

Reducing environmental pollution via elimination of sulfur compounds from gas condensate was the aim of this research. Whereby oxidative desulfurization from gas condensate with 3200 ppm initial sulfur was accomplished by hydrogen peroxide (30%wt) as oxidant and formic acid as catalyst. The sulfones after generation in the oxidation step were extracted through a method of liquid-liquid extracti...

متن کامل

Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology

Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...

متن کامل

optimization of raw sugar beet juice purification process conditions using bentonite by response surface methodology

in this study, response surface methodology was used to determine the optimum raw sugar beet juice purification process conditions using bentonite to produce inverted liquid sugar. for this purpose, impact of factors on the purification process such as bentonite concentration (1-5 gr/li), ph (3.5-6) and temperature (35-95 ˚c) was investigated. for each response, a second-order polynomial model ...

متن کامل

Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology

Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
پژوهش های علوم و صنایع غذایی ایران

جلد ۱۲، شماره ۳، صفحات ۳۵۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023