one and two dimensional ultrasonic vibration tool

نویسندگان

سعید امینی

محمدرضا خسروجردی

مهدی محمدی مهر

چکیده

this research is carried out to design and manufacturing of lathe vibration tool and their tests. firstly, one-dimensional vibration tool is designed and made of the bending vibration mode. one-dimensional vibration tool with half piezoelectric rings is considered to excite the bending mode of tool. structure of vibration tool is designed in abaqus software about 20 khz and then is made with respect to the best obtained geometry of tool for bending vibration mode. finally, two- dimensional vibration tool is designed and made in abaqus software for elliptical vibration mode. also, experiment tests are done in turning operations using one- and two-dimensional vibrating tools with bending and elliptical modes on the copper, respectively and the accuracy of the made instruments is investigated. results show that vibration tool in turning process reduces the main cutting force

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study on Imitating Grinding of Two-Dimensional Ultrasonic Vibration Turning System

According to turning instead of grinding process requirements and traditional working principle of ultrasonic vibration turning, a new idea of imitating grinding of two-dimensional ultrasonic vibration turning is brought firstly, and the mechanism of two-dimens ional ultrasonic vibration turning is elaborated. Based on the MATLAB software, grinding trajectory simulation and honing trajectory si...

متن کامل

an investigation on the kinematics of tool-workepiece’s relative movement in one-directional ultrasonic-vibration assisted turning

the aim of present study is to investigate the kinematics of tool-workpiece’s relative movement in conventional and ultrasonic-vibration assisted turning (uat). the kinematic analysis of uat shows that the movement of cutting tool edge relative to the workpiece resulted from the cutting speed, feed speed and tool’s vibration affects the lateral machined surface of workepiece and leaves a repeat...

متن کامل

Chapter 14 Vibration and Diffusion in One – Dimensional Media

In this chapter, we study the solutions, both analytical and numerical, to the two most important equations of one-dimensional continuum dynamics. The heat equation models the diffusion of thermal energy in a body; here, we analyze the case of a one-dimensional bar. The wave equation describes vibrations and waves in continuous media, including sound waves, water waves, elastic waves, electroma...

متن کامل

Stability and vibration analyses of tapered columns resting on one or two-parameter elastic foundations

This paper presents a generalized numerical method to evaluate element stiffness matrices needed for the free vibration and stability analyses of non-prismatic columns resting on one- or two-parameter elastic foundations and subjected to variable axial load. For this purpose, power series approximation is used to solve the fourth–order differential equation of non-prismatic columns with v...

متن کامل

Mapping two-dimensional polar active fluids to two-dimensional soap and one-dimensional sandblasting

Active fluids and growing interfaces are two well-studied but very different non-equilibrium systems. Each exhibits non-equilibrium behaviour distinct from that of their equilibrium counterparts. Here we demonstrate a surprising connection between these two: the ordered phase of incompressible polar active fluids in two spatial dimensions without momentum conservation, and growing one-dimension...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
علوم کاربردی و محاسباتی در مکانیک

جلد ۲۶، شماره ۱، صفحات ۳۵-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023