optimal trajectory generation for energy consumption minimization and moving obstacle avoidance of surena iii robot’s arm

نویسندگان

mohammad mahdavian

center of advanced systems and technologies(cast), faculty of mechanical engineering, university of tehran, tehran, iran aghil yousefi-koma

school of mechanical eng faculty of engineering university of tehran masoud shariat-panahi

faculty of mechanical engineering, university of tehran, tehran, iran majid khadiv

faculty of mechanical engineering, k. n. toosi university of technology, tehran, iran amirmasoud ghasemi toudeshki

چکیده

in this paper, trajectory generation for the 4 dof arm of surena iii humanoid robot with the purpose of optimizing energy and avoiding a moving obstacle is presented. for this purpose, first, kinematic equations for a seven dof manipulator are derived. then, using the lagrange method, an explicit dynamics model for the arm is developed. in the next step, in order to generate the desired trajectory for the arm, two different methods are utilized. in the first method, each joint motion is presented by a quadratic polynomial. in the second one, the end effector’s path has been considered as 3 polynomial functions. also, a known moving spherical obstacle with a linear path and constant velocity is considered in robot workspace. the main goal of optimization is to reduce the consumed energy by the arm in a movement between two known points in a specified time frame to avoid the moving obstacle. initial and final velocities of the arm are set as zero. to this end, the optimization is carried out using genetic algorithm. finally, in order to obtain the most reliable solutions for trajectory generation, many optimizations with various parameters are conducted and the results are presented and discussed.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimal Trajectory Generation for Energy Consumption Minimization and Moving Obstacle Avoidance of SURENA III Robot’s Arm

In this paper, trajectory generation for the 4 DOF arm of SURENA III humanoid robot with the purpose of optimizing energy and avoiding a moving obstacle is presented. For this purpose, first, kinematic equations for a seven DOF manipulator are derived. Then, using the Lagrange method, an explicit dynamics model for the arm is developed. In the next step, in order to generate the desired traject...

متن کامل

Optimal Trajectory Planning of a Mobile Robot with Spatial Manipulator For Spatial Obstacle Avoidance

Mobile robots that consist of a mobile platform with one or many manipulators mounted on it are of great interest in a number of applications. Combination of platform and manipulator causes robot operates in extended work space. The analysis of these systems includes kinematics redundancy that makes more complicated problem. However, it gives more feasibility to robotic systems because of the e...

متن کامل

Whole-Arm obstacle avoidance for non similar redundant teleoperated robots

This paper presents a controller for whole-arm obstacle avoidance for the slave robot in an unilateral teleoperated robotic system. The slave controller is free of robot inverse kinematics model, and it is conformed of two parts. First a cartesian PID controller is used to render closed loop system stability. The second controller part is the on-line solution of a dynamic optimization problem. ...

متن کامل

polynomial optimal trajectory planning and obstacle aviodance for omni-directional mobile robots in dynamic environments

this paper presents a parameterization method to optimal trajectory planning and dynamic obstacle avoidance for omni-directional robots. the aim of trajectory planning is minimizing a quadratic cost function while a maximum limitation on velocity and acceleration of robot is considered. first, we parameterize the trajectory using polynomial functions with unknown coefficients which transforms t...

متن کامل

Direct trajectory generation for vision-based obstacle avoidance

In this paper, a method for direct trajectory generation for robotic manipulators is proposed. The method is specifically designed for obstacle avoidance and can incorporate kinematic constraints into the avoidance motion. In particular, a point-to-point and multi-point trajectory generator is proposed in which different levels of constraints can be established on viaand end-points. The approac...

متن کامل

Planning and Obstacle Avoidance for Mobile Robots

A planning methodology for nonholonomic mobile manipulators that employs smooth and continuous functions such as polynomials is developed. The method decouples kinematically the manipulator from the platform by constructing admissible paths that drive it to a final configuration and is based on mapping the nonholonomic constraint to a space where it can be trivially satisfied. In addition, the ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of robotics

جلد ۴، شماره ۳، صفحات ۱-۹

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023