production method of rubber and sulfur fg composites

نویسندگان

s. mohammadi*

f. abdi

چکیده

in the presented work, sulfur concrete and rubber were used for producing functionally graded materials (fgm). the physical and mechanical properties of sulfur concrete and rubber were changed continuously across the thickness. on one side, there was just rubber and, on the other, there was pure sulfur; the properties of each substance were moved to reach another. this kind of material was constructed by applying mechanical pressure on all layers together and heating in a casting die. thus, it is essential to consider the quantity of sulfur and rubber at each layer and the rule obeyed by physical and mechanical properties. in the drop test, it was found that the elastic impact coefficient changed from sulfur concrete around 50% to rubber around near zero. it seems that, by changing some parameters like combination percentage or layers' thickness, it is possible to optimize the fgm.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Production method of rubber and sulfur FG composites

In the presented work, sulfur concrete and rubber were used for producing functionally graded materials (FGM). The physical and mechanical properties of sulfur concrete and rubber were changed continuously across the thickness. On one side, there was just rubber and, on the other, there was pure sulfur; the properties of each substance were moved to reach another. This kind of material was cons...

متن کامل

Tribological Property of FG/UHMWPE Composites

Fluorinated graphene/ultra high molecular weight polyethylene (FG/UHMWPE) composites were prepared by ultrasonic dispersion and hot pressing. The mechanical propertys and tribological property of pure UHMWPE and FG/UHMWPE composites were investigated by micro hardness tester and high-speed reciprocating friction tester. The wear volume of the sample was measured by the scanning electron microsc...

متن کامل

High Performance Graphene Oxide Based Rubber Composites

In this paper, graphene oxide/styrene-butadiene rubber (GO/SBR) composites with complete exfoliation of GO sheets were prepared by aqueous-phase mixing of GO colloid with SBR latex and a small loading of butadiene-styrene-vinyl-pyridine rubber (VPR) latex, followed by their co-coagulation. During co-coagulation, VPR not only plays a key role in the prevention of aggregation of GO sheets but als...

متن کامل

study the effects of low level laser diode on no production and healing of diabetic and cortisone acetate and normal wounded sd rats

nitric oxide (no) is a small molecule synthesized by most of mammalian cells with diverse biological activities including vasodilatation, host defense and wound healing. impaired wound healing is a common occurrence among diabetics and patients receiving glucocorticoid therapy. on the other hand the application of laser in biomedical area have been increased. thus, the current studies were desi...

15 صفحه اول

Rubber production in guayule: determination of rubber producing potential.

Optimum conditions for the rapid, efficient, nondestructive determination of rubber producing potential in guayule (Parthenium argentatum) were established. The rubber producing potential may be defined as the ability of the plant material to synthesize rubber from a precursor under specified conditions. To achieve this, stem slices taken from the first 5 centimeters of branches were incubated ...

متن کامل

Fabrication of Wood-Rubber Composites Using Rubber Compound as a Bonding Agent Instead of Adhesives

Differing from the hot-pressing method in the manufacturing of traditional wood-rubber composites (WRCs), this study was aimed at fabricating WRCs using rubber processing to improve water resistance and mechanical properties. Three steps were used to make WRCs, namely, fiber-rubber mixing, tabletting, and the vulcanization molding process. Ninety-six WRC panels were made with wood fiber content...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of computational & applied research in mechanical engineering (jcarme)

ناشر: shahid rajaee teacher training university (srttu)

ISSN 2228-7922

دوره 2

شماره 1 2012

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023