dose measurment in ultraviolet disinfection of water and waste water by chemical method
نویسندگان
چکیده
chemical methods ( actinometry ) depend on the measurement of the extent to which a chemical reaction occurs under the influence of uv light. two chemical actinometers have been used in this research. in one method, the mixtures of potassium peroxidisuiphate butanol solutions were irradiated for various time intervals, and ph-changes were determined. a linear relationship was observed between these changes and uv-dose applied. in another method, the acidic solutions of ammonium molybdate and ethyl alcohol were irradiated and the intensity of blue color developed was determined by titration with potassium permanganate solutions. the volumes of titrant used were then plotted versus the uv-doses. this showed a linear relationship which could be used for dosimeiry. both of these actometers proved to be reliable. the first is the method of choice with a view to have much accuracy and the second method is preferred because of its feasibility and having advantages of no need to any equipment and non-accessible raw materials.
منابع مشابه
chemical recycling of polycarbonate waste using conventional heating and microwave assisted method
پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...
Numerical Simulation of an Open Channel Ultraviolet Waste-water Disinfection Reactor
.............................................................................................................................. ii Acknowledgments.............................................................................................................. iii Table of
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Innovative Technologies for Waste Water Disinfection and Pathogen Detection
New and improved methods are needed to disinfect pathogens in treated wastewater, especially highly resistant ones like Cryptosporidium parvum oocysts. In addition, new and improved methods are needed to detect pathogens and indicators for them in wastewater in order to monitor the efficacy of disinfection and other waste water treatment processes. Spores of the anaerobic bacterium Clostridium ...
متن کاملChlorine in water disinfection
Disinfection of drinking-water is one of the main achievements of our time in the protection of public health. The use of chlorine for the destruction of microbiological pathogens is essential to protect the public from outbreaks of waterborne disease. Chlorine, as well as other disinfectants, produces a variety of chemical by-products. The risk from the presence of microbial pathogens in drink...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of public healthجلد ۲۴، شماره ۱-۲، صفحات ۳۵-۴۴
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023