a comparison of different control design methods for the linearized cstr temperature model

نویسندگان

a. d. shakib joo

چکیده

continuous stirred tank reactor (cstr) has particular importance in chemical industry. cstr has usually a nonlinear behavior which makes it difficult to control. the reactor has two parameters: the concentration and temperature of mixture both of which are uncertain. this case of cstr has large disturbance in domain. in order for disturbance rejection, a controller has to be designed. in this paper, for modeling the cstr system, first, the pi and pid controllers are designed by two methods, the automatic with matlab simulink and ziegler-nichols (z-n) method. then, reset control is replaced and tuned by their parameters. the main aim of this work is to compare the output responses (temperatures) of controllers with each other. in this work a reset controller is proposed for the thermal reactor model. due to complexity of control of this plant, different design methods should be evaluated for disturbance rejection and input tracking. the results show that the reset controller is better than the pi controller in disturbance elimination. finally, controller’s output response is investigated for improvement in disturbance rejection and change in the set-point.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Comparison of Different Control Design Methods for the Linearized CSTR Temperature Model

Continuous Stirred Tank Reactor (CSTR) has particular importance in chemical industry. CSTR has usually a nonlinear behavior which makes it difficult to control. The reactor has two parameters: the concentration and temperature of mixture both of which are uncertain. This case of CSTR has large disturbance in domain. In order for disturbance rejection, a controller has to be designed. In this p...

متن کامل

A Comparison of Different Control Design Methods for the Linearized CSTR Temperature Model

A Comparison of Different Control Design Methods for the Linearized CSTR Temperature Model A. D. Shakib Joo Faculty of Electrical and Computer Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran Corresponding Author: [email protected] ARTICLE INFO ABSTRACT ARTICLE HISTORY: Received 4 October 2013 Revised 12 December 2013 Accepted 15 December 2013 Continuous Stirred Tank Re...

متن کامل

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

the use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach

abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...

15 صفحه اول

on the comparison of keyword and semantic-context methods of learning new vocabulary meaning

the rationale behind the present study is that particular learning strategies produce more effective results when applied together. the present study tried to investigate the efficiency of the semantic-context strategy alone with a technique called, keyword method. to clarify the point, the current study seeked to find answer to the following question: are the keyword and semantic-context metho...

15 صفحه اول

development of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles

a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of electrical and computer engineering innovations

ناشر: shahid rajaee teacher training university (srttu)

ISSN 2322-3952

دوره 1

شماره 2 2013

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023