evaluation of bioactivity and the ability to release fluoride in glass-ionomer cement/silk fiber composite

نویسندگان

مینا بهرامی آبادی

احمد منشی

mina bahrami abadi

ahmad monshi

چکیده

introduction: glass-ionomer cements (gics) are one of the most important dental restorative biomaterials. the aim of this study was to synthesize glass-ionomer‒silk fiber composite and evaluate the effect of adding natural degummed silk fiber on the bioactivity and the ability to release fluoride by glass-ionomer cement. materials and methods: in this study, commercial fuji ii glass-ionomer cement was reinforced by silk fiber. to this end, silk fibers were degummed and glass-ionomer‒silk fiber composite, containing 3 wt% of silk fiber, was fabricated. the morphology, fiber diameter and the presence of fibroin in the silk fiber were investigated by scanning electron microscopy (sem) and fourier transform infrared spectroscopy (ftir), respectively. artificial saliva was used to evaluate fluoride ion release in a period of 14 days and simulated body fluid (sbf) was used to evaluate the material’s bioactivity for 1, 3, 7, 14 and 21 days. statistical analysis was carried out with anova using three samples (n=3). statistical significance was set at p value < 0.05. results: the results of sem and ftir analysis confirmed the presence of fibroin. fluoride ion release experiment indicated less fluoride ion release from the composite compared to fuji ii gc. scanning electron microscopy and fourier transform infrared spectroscopy confirmed the presence of calcium and phosphate, increasing the probability of bioactivity of the composite. statistical analysis showed that the differences between the results of all the groups were significant (p value < 0.05). conclusion: given the limitations of the present study , the results showed that the glass-ionomer cement‒silk fiber composite released less fluoride but at longer periods and is probably more bioactive compared to conventional glass-ionomer.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

fluoride release and bioactivity evaluation of glass ionomer: forsterite nanocomposite

background: the most important limitation of glass ionomer cements (gics) is the weak mechanical properties. our previous research showed that higher mechanical properties could be achieved by addition of forsterite (mg2sio4) nanoparticles to ceramic part of gic. the objective of the present study was to fabricate a glass ionomer- mg2sio4 nanocomposite and to evaluate the effect of addition of ...

متن کامل

Fluoride Release by Glass Ionomer Cements, Compomer and Giomer

BACKGROUND To measure the amounts of fluoride released from fluoride-containing materials, four glass ionomer cements (Fuji IX, Fuji VII, Fuji IX Extra and Fuji II LC), a compomer (Dyract Extra) and a giomer (Beautifil) were used in this study. METHODS Twenty cylindrical specimens were prepared from each material. The amount of released fluoride was measured during the first week and on the d...

متن کامل

Fluoride Release from Conventional Glass-ionomer Cements and Polyacid-modified Composite Resins

Fluoride release into deionized water from two glass-ionomer cements (Aqua Ionofil and Ceramfil β) and two polyacid-modified composite resins or compomers (Hytac and Dyract AP) was examined over different time periods. Nine cylindrical specimens (2.5 x 8.5 mm) of each material were prepared and allowed to stand in deionized water. The resulting solutions were analyzed for fluoride by the Alizar...

متن کامل

Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?

OBJECTIVES The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. MATERIALS AND METHODS The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC,...

متن کامل

fluoride release by glass ionomer cements, compomer and giomer

normal 0 false false false en-us x-none ar-sa microsoftinternetexplorer4 background: to measure the amounts of fluoride released from fluoride-containing materials, four glass ionomer cements (fuji ix, fuji vii, fuji ix extra and fuji ii lc), a compomer (dyract extra) and a giomer (beautifil) were used in this study . methods: twenty cylindrical specimens were prepared from each material. the a...

متن کامل

Comparison of the Amount of Fluoride Release from Nanofilled Resin Modified Glass Ionomer, Conventional and Resin Modified Glass Ionomer Cements

OBJECTIVE To investigate and compare the amount of fluoride release of conventional, resin modified and nanofilled resin modified glass ionomer cements. MATERIALS AND METHODS Tablets of glass-ionomer cements were immersed in deionized water and incubated at 37°C. After 1, 2, 7, 15 and 30 days, fluoride ion was measured under normal atmospheric conditions by fluoride ion selective electrode. B...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
مجله دانشکده دندانپزشکی اصفهان

جلد ۱۱، شماره ۵، صفحات ۳۷۸-۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023