recharge pattern of contemporary glass ionomer restoratives

نویسندگان

farahnaz arbabzadeh- zavareh

tim gibbs

ian a. meyers

majid bouzari

چکیده

background: as glass ionomers have the ability to reload fluoride from outside sources, the aim was to compare the recharge pattern of six glass ionomer cements after exposure to fluoride. materials and methods: fuji vii, fuji ix, riva pink, riva bleach, ketac fil and fuji ix extra were investigated. the fluoride-containing materials used were tooth paste and mouth wash (colgate). specimens of each material ( n =15) were immersed separately in deionized water for 59 days. then the samples of each material were divided into three groups of five each. two groups were recharged for 2, 20 and 60 min daily during three consecutive weekly intervals and then no treatment for one week. the third group was used as control. fluoride release measurements (μg/cm2/day) were made in every 24 h. one-way and repeated measures analysis of variance tests were used. results: tooth paste recharged materials showed higher level of recharge. on day 1, the difference of fluoride release from different treatment groups of different materials except for fuji ix extra were not significant ( p> 0.05). on days 7 and 14, the differences observed were significant ( p< 0.05) for all materials except for fuji vii (tooth paste versus mouth wash) and trial fuji ix (mouth wash versus control) and on day 14 for rvia pink (mouth wash versus control). on days 21 and 28, the differences observed were significant for all the materials ( p< 0.05) except for riva pink (toothpaste versus mouth wash), riva bleach, ketac fil and trial fujii x (mouth wash versus control) on day 28. conclusion: a time tabled schedule of application of fluoride-containing materials could help to achieve high fluoride release. key words: glass ionomer cements, mouth wash, recharge, toothpaste

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The crushing truth about glass ionomer restoratives: exposing the standard of the standard.

OBJECTIVES The compressive fracture strength (CFS) test is the only strength test for glass ionomers (GIs) in ISO 9917-1: 2003. The CFS test was the subject of much controversy in 1990 and has been challenged over its appropriateness and reproducibility and the study aimed to revisit the suitability of the CFS test for GIs. METHODS Groups of 20 (four batches of n=5) cylinders (6.0±0.1mm heigh...

متن کامل

Comparative study of radiopacity of resin-based and glass ionomer-based bulk-fill restoratives using digital radiography.

This study investigated the radiopacity values of glass ionomer- and resin-based bulk-fill restoratives of different thicknesses using digital radiography. Two glass ionomer-based and three resin-based bulk-fill restoratives, and a conventional composite were studied. Five disc-shaped specimens were prepared from each of these materials at three different thicknesses; specimens of enamel and de...

متن کامل

Glass ionomer cements.

Glass ionomer cements have been used in pediatric restorative dentistry for 20 years. Their usefulness in pediatric restorative dentistry is preferential relative to other materials because of their fluoride release, chemical adhesion to tooth structure, and availability to use in a variety of clinical scenarios. This paper reviews the use of glass ionomer materials in pediatric restorative den...

متن کامل

a review of glass-ionomers: from conventional glass-ionomer to bioactive glass-ionomer

materials used in the body, especially the materials used in various oral cavity regions should be stable and passive without any interactions with the body tissues or fluids. dental amalgam, c omposite resins and dental cements are the materials of choice with such properties. the first attempts to produce active materials, which could interact with the human body tissues and fluids were promp...

متن کامل

سیمان های گلاس اینومر Glass-Ionomer cement

Normal 0 false false false EN-US X-NONE AR-SA Class-Ionomer cements include calcium aluminosilicate glass and fluid component of acrylic acid.  An important property of these cements is chemical adhesion to enamel and dentin and releasing anti-caries fluride. Clinical use of these cements involves filling erosions without cavity preparation, preven...

متن کامل

Do conventional glass ionomer cements release more fluoride than resin-modified glass ionomer cements?

OBJECTIVES The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. MATERIALS AND METHODS The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC,...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
dental research journal

جلد ۹، شماره ۲، صفحات ۰-۰

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023