a developed approach based on grinding time to determine ore comminution properties

نویسندگان

negar saeidi

dariush azizi

mohammad noaparast

soheila aslani

r ramadi

چکیده

in this paper, iron ore sample from the chadormalu was investigated to determine some comminution properties. chadormalu deposit is one of the largest iron ore mine in iran, which is located in yazd province. the representative ore sample contained 57%fe, 0.9%p and 0.17%s. the sample was crushed; afterward, it was ground in various grinding times according to the bond ball mill approach to specify the work index values. based on different grinding times and the obtained results, a new work index equation was then simulated through which grinding time was considered as the main variable. the relationships between work index, the work input and p80 were then concluded. in addition, the results of tests were then used to estimate the selection function parameter. a new equation was applied to determine energy efficiency which could be implemented for energy consumption calculation. two equations for eb and eb/elimit were then obtained, where eb is the efficiency of comminution, and the elimit is the maximum limiting energy efficiency for particle fracture under compressive loading. these equations could estimate the parameters of the iron ore would be precisely estimated. indeed, by means of work index value; some crushing and grinding characteristics of the taken sample were assessed by which comminution circuit would be designed much better.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A developed approach based on grinding time to determine ore comminution properties

In this paper, iron ore sample from the Chadormalu was investigated to determine some comminution properties. Chadormalu deposit is one of the largest iron ore mine in Iran, which is located in Yazd province. The representative ore sample contained 57%Fe, 0.9%P and 0.17%S. The sample was crushed; afterward, it was ground in various grinding times according to the Bond Ball mill approach to spec...

متن کامل

Nickel ore grinding energy determination

This study describes the application of an empirical method to estimate the energy consumption in laboratory of the primary grinding of nickel ore with a specific mineralogical texture. This method developed by Donda was previously used in iron ore from the Iron Quadrangle (Minas Gerais, Brasil) with the same purpose. Through the grinding test, performed under standard conditions and based on t...

متن کامل

iranian english learners’ perception and personality: a dual approach to investigating influential factors on willingness to communicate

abstract previous studies on willingness to communicate (wtc) have shown the influence of many individual or situational factors on students’ tendency to engage in classroom communication, in which wtc has been viewed either at the trait-level or situational level. however, due to the complexity of the notion of willingness to communicate, the present study suggests that these two strands are ...

A PRACTICAL APPROACH TO REAL-TIME DYNAMIC BACKGROUND GENERATION BASED ON A TEMPORAL MEDIAN FILTER

In many computer vision applications, segmenting and extraction of moving objects in video sequences is an essential task. Background subtraction, by which each input image is subtracted from the reference image, has often been used for this purpose. In this paper, we offer a novel background-subtraction technique for real-time dynamic background generation using color images that are taken fro...

متن کامل

Application of Response Surface Method to the Estimation of Bond Work Index

Introduction The main objective of this contribution is to focus on the portion of the comminution process which deals with the prediction of the energy consumption due to the comminution portion of the milling processes. The comminution energy in mineral processing and cement industry is usually determined by empirical Bond Work Index (BWI), regardless of the mechanical properties of a rock....

متن کامل

State and Ore Hardness Estimation in Semiautogenous Grinding ?

Semiautogenous milling is difficult to control both because of its non-linear behavior and the effects of overloading due to increases in the ore charge or variations in ore characteristics. Advanced control strategies and operational change detection methods are thus in need of strengthening using techniques such as state estimation. Non-linear state estimation is a complex task for which vari...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of mining and environment

ناشر: university of shahrood

ISSN 2251-8592

دوره 4

شماره 2 2013

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023