application of schmidt rebound number for estimating rock strength under specific geological conditions

نویسندگان

s. r. torabi

m. ataei

m. javanshir

چکیده

a literature review revealed that most of the empirical equations introduced for determination of the uniaxial compressive strength (ucs) of rocks based on the schmidt hammer rebound number (n) are not sufficiently reliable mostly due to the relatively low coefficient of correlations. this is attributed to the fact that in most cases one formula is used for all types of rocks, although the density of rocks is introduced to the formulae in some cases. on the other hand, if one specific relationship between n and ucs is introduced for one rock type, the equation will yield a much higher coefficient of correlation. during a research program supported by the shahrood university of technology, iran, a third type of approach was considered. the study aimed to establish a relationship between n and ucs of a rock mass under particular geological circumstances. as an example, in this study, the immediate roof rock of coal seams in north-eastern coal fields of iran was selected. in order to determine the n and ucs, a significant number of samples were selected and tested, both in-situ and in the laboratory, and a new equation was established. the equation can be used to predict ucs of the roof rock in coal extracting areas in this zone by performing simple in-situ schmidt hammer tests. it is predicted that such a procedure will be feasible for other geological conditions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of Schmidt rebound number for estimating rock strength under specific geological conditions

A literature review revealed that most of the empirical equations introduced for determination of the uniaxial compressive strength (UCS) of rocks based on the Schmidt hammer rebound number (N) are not sufficiently reliable mostly due to the relatively low coefficient of correlations. This is attributed to the fact that in most cases one formula is used for all types of rocks, altho...

متن کامل

Application of Soft Computing Methods for the Estimation of Roadheader Performance from Schmidt Hammer Rebound Values

Estimation of roadheader performance is one of the main topics in determining the economics of underground excavation projects. The poor performance estimation of roadheader scan leads to costly contractual claims. In this paper, the application of soft computing methods for data analysis called adaptive neuro-fuzzy inference system- subtractive clustering method (ANFIS-SCM) and artificial  neu...

متن کامل

3D Geological Modeling under Extremely Complex Geological Conditions

3D modeling method is divided into geospatial modeling and 3D geological modeling. 3D geological modeling technique has become a favorable tool for people to observe and analyze the geological body enriched in mineral resources. Unlike geospatial modeling, 3D geological modeling must consider various geological conditions affecting spatial shape and petrophysical distribution of geological body...

متن کامل

A Variable Turbulent Schmidt Number Formulation for Scramjet Application

In high speed engines, thorough turbulent mixing of fuel and air is required to obtain high performance and high efficiency. Thus, the ability to predict turbulent mixing is crucial in obtaining accurate numerical simulation of an engine and its performance. Current state of the art in CFD simulation is to assume both turbulent Prandtl number and Schmidt numbers to be constants. However, since ...

متن کامل

A laboratory study of rock properties affecting the penetration rate of pneumatic top hammer drills

In this paper, after collecting the rock samples from eight mines and one high way slope, the tests for determination of dry density, Uniaxial Compressive Strength, tensile Strength (Brazilian Test), elastic modulus, Schmidt hammer rebound number have been done on samples. In addition, in order to calculating the mean size of rock grains, quartz content, hardness and abrasivity, a thin sections...

متن کامل

application of upfc based on svpwm for power quality improvement

در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...

15 صفحه اول

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of mining and environment

ناشر: university of shahrood

ISSN 2251-8592

دوره Volume 1

شماره Number 2 2011

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023