exergy analysis of evaporative cooling for optimum energy consumption in diverse climate conditions

نویسندگان

moien farmahini-farahani

hadi pasdarshahri

چکیده

in this paper, exergy of conditioned air, exergy efficiency, irreversibility, and entropy generation of common models of evaporative cooling have been investigated in five cities of iran. direct evaporative cooling (dec), indirect evaporative cooling (iec), and two-stage iec/dec as the most popular methods of cooling have been modeled. atmospheric conditions are considered as the dead state of each city. exergy analyses of conditioned air are based on the output results of the theoretical modeling of evaporative cooling. moreover, exergy balances of three cooling methods are derived. thus, exergy destruction, reversible work, and entropy generatiom are calculated according to the exergy balances. the results obtained reveal that bam, which is a hot city with medium relative humidity (24%rh), has the best exergy efficiency of direct evaporative cooling. the highest exergy efficiency of two-stage indirect/direct evaporative cooling belongs to kerman. kerman with the lowest dry-bulb temperature has medium relative humidity (24%rh). in addition, total output exergy of air in yazd is more than other cities. yazd is a hot-dried city with rather low relative humidity (19.5%rh).

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Exergy Analysis of Evaporative Cooling for Optimum Energy Consumption in Diverse Climate Conditions

In this paper, exergy of conditioned air, exergy efficiency, irreversibility, and entropy generation of common models of evaporative cooling have been investigated in five cities of Iran. Direct evaporative cooling (DEC), indirect evaporative cooling (IEC), and two-stage IEC/DEC as the most popular methods of cooling have been modeled. Atmospheric conditions are considered as the dead state of ...

متن کامل

Analysis of Exergy of Moist Air and Energy Saving Potential in Hvac by Evaporative Cooling or Energy Recovery

Of evaporative cooling or energy recovery potential in HVAC, the conventional thermodynamic analysis is based on the enthalpy of moist air. In fact, the available energy of moist air is its exergy and the available energy saving potential ought to be the exergy. Isoexergic lines on psychometric charts associated with different ambient states persuade us that exergy and enthalpy are completely i...

متن کامل

01 Optimum planning and scheduling of a water-energy of a greenhouse in different climate conditions in Iran

This study aims to optimize the energy supply system of a greenhouse considering twelve different climate conditions in Iran. For this purpose, an integrated two-objective linear energy optimization model has been developed to control the inside temperature and provide the required heating, cooling, and electricity by receiving electricity, gas, and water. The mentioned goals are to minimize op...

متن کامل

01 Optimum planning and scheduling of a water-energy of a greenhouse in different climate conditions in Iran

This study aims to optimize the energy supply system of a greenhouse considering twelve different climate conditions in Iran. For this purpose, an integrated two-objective linear energy optimization model has been developed to control the inside temperature and provide the required heating, cooling, and electricity by receiving electricity, gas, and water. The mentioned goals are to minimize op...

متن کامل

economic optimization and energy consumption in tray dryers

دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...

15 صفحه اول

Exergy And Energy Analysis Of Waste Heat Recovery Options For Cooling Capacity Production

Electricity production in Lebanon stands at around 1.5 GW while the demand exceeds 2.5 GW at peak times and peak cooling demands, resulting in rationing cuts from between 3 to 20 hours a day which is the worst performance in the Middle East. Due to the country energy shortfall, a large number of small-scale backup generators is installed to address the electric and cooling needs. The proliferat...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of mechanical research and application

ISSN 2251-7383

دوره 3

شماره 1 2011

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023