simultaneous rpd and svc placement in power systems for voltage stability improvement using a fuzzy weighted seeker optimization algorithm

نویسندگان

f. namdari

l. hatamvand

n. shojaei

h. beiranvand

چکیده

voltage stability issues are growing challenges in many modern power systems. this paper proposes optimizing the size and location of static var compensator (svc) devices using a fuzzy weighted seeker optimization algorithm (fwsoa), as an effective solution to overcome such issues. although the primary purpose of svc is bus voltage regulation, it can also be useful for voltage stability enhancement and even real power losses reduction in the network. to this aim, a multi-objective function is presented which includes voltage profile improvement, voltage stability margin (vsm) enhancement and minimization of active power losses. voltage stability is very close to reactive power dispatch (rpd) in the network. therefore, in addition to voltage regulation with locating svcs, considering all of the other control variables including excitation settings of generators, tap positions of tap changing transformers and reactive power output of fixed capacitors in the network, simultaneous rpd and svc placement will be achieved. simulation results on ieee 14 and 57-bus test systems, applying genetic algorithm (ga), particle swarm optimization (pso), seeker optimization algorithm (soa) and fwsoa verify the efficiency of fwsoa for the above claims.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simultaneous RPD and SVC Placement in Power Systems for Voltage Stability Improvement Using a Fuzzy Weighted Seeker Optimization Algorithm

Voltage stability issues are growing challenges in many modern power systems. This paper proposes optimizing the size and location of Static VAR Compensator (SVC) devices using a Fuzzy Weighted Seeker Optimization Algorithm (FWSOA), as an effective solution to overcome such issues. Although the primary purpose of SVC is bus voltage regulation, it can also be useful for voltage stability enhance...

متن کامل

Optimal Placement and Sizing of TCSC & SVC for Improvement Power System Operation using Crow Search Algorithm

Abstract: The need for more efficient power systems has prompted the use of a new technologies includes Flexible AC transmission system (FACTS) devices. FACTS devices provides new opportunity for controlling the line power flow and minimizing losses while maintaining the bus voltages within a permissible limit. In this thesis a new method is proposed for optimal placement and sizing of Thyristo...

متن کامل

Optimal Placement and Sizing of SVC in Power System for Voltage Stability Improvement using Harmony Search Algorithm

Voltage Instability is one of the major phenomena which has resulted a major obstruct to power system network. Use FACTS controllers possible that voltage stability status in a stressed power system could be improved with effective reactive power compensation. This paper proposes at multi-objective optimization problem such as minimization of real power loss, L-index and load voltage deviation....

متن کامل

Voltage Stability Improvement using STATCOM and SVC

Voltage stability of a system is affected by reactive power limit of the system. FACTs devices improve the reactive power flow in system thereby improving voltage stability. This paper explores the effect of SVC and STATCOM on static voltage stability. IEEE14 bus system has been used to demonstrate the ability of SVC and STATCOM in improving the voltage stability margin. These FACTs controllers...

متن کامل

Optimal Placement of SVC for Losses Reduction and Voltage Profile Improvement in Electrical Power System Using Improved Gravitational Search Algorithm

The development of the more increasing power electronics allows the use of FACTS devices to manage and improve either the flow of power or the stability of the power system. One type of FACTS device studied is the SVC. In this study, optimization of SVC is used to determine the most appropriate location and rating in order to obtain the optimum power transfer. Optimization methods used in this ...

متن کامل

Optimal DG Placement for Power Loss Reduction and Improvement Voltage Profile Using Smart Methods

Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of operation and automation in power engineering

ناشر: university of mohaghegh ardabili

ISSN 2322-4576

دوره 2

شماره 2 2014

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023