the effect of slag types and melting rate on electro-slag remelting (esr) processing

نویسندگان

k. mehrabi

m. r. rahimipour

a. shokuhfar

چکیده

in this research, the influence of chemical composition of slags and the melting rate on the impurity of commercial grade iron in esr processing has been investigated.the chemical composition and microstructure studies were evaluated, using spectrophotometer,omand edx analyses attached to sem.the results show that esr process has successfully reduced the amount and size of inclusions. in some cases, sulfide inclusions were not observed and the size of other inclusions was reduced down to 10 , whereas in primary electrodes the size of inclusion was up to 100 . an increase in the slag basicity up to a critical point and a decrease in the melting rate caused better desulfurization ability of the slags. however, the increase in the time of process was governed by the melt temperature and fluidity.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Slag Types and Melting Rate on Electro-Slag Remelting (ESR) Processing

In this research, the influence of chemical composition of slags and the melting rate on the impurity of commercial grade iron in ESR processing has been investigated.The chemical composition and microstructure studies were evaluated, using spectrophotometer,OMand EDX analyses attached to SEM.The results show that ESR process has successfully reduced the amount and size of inclusions. In some c...

متن کامل

EFFECTS OF ELECTRO-SLAG REMELTING PROCESS (ESR) ON MACROSTRUCTURE AND REFINEMENT OF A MEDICAL GRADE OF STAINLESS STEEL

This study is focused on the effects of electroslag remelting by prefused slag (CaO, Al2O3, and CaF2) on macrostructure and reduction of inclusions in the medical grad of 316LC (316LVM) stainless steel. Results showed that in order to obtain uniform ingot structures during electroslag remelting, the shape and depth of the molten pool should be carefully controlled. High melting rates lead to de...

متن کامل

Production of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE)

This study focused on the effect of electro slag remelting process (ESR) on microstructure and composition of an as-cast alloy of Cu-Cr-Zr. These observations revealed that applying ESR process results in a more uniform distribution of alloying elements, however a slight aggregation of large precipitates and inclusions existed in as-cast ingot was found. Additionally, impurities like P, S and M...

متن کامل

: the effect of sericin levels (silk glue protein) on rate of in vitro maturation, fertilization and culture of sheep oocytes

هدف از آزمایش اول بررسی اثر سطوح مختلف سریسین [0 (control), 0.1, 0.5, 1.0, 2.5 %] افزوده شده به محیط , ivm بر cumulus cell expansion، بلوغ هسته و توسعه متوالی جنین، در گوسفندان نژاد سنجابی در فصل تولید مثلی می باشد. از سرگیری میوز به وسیله خارج شدن اولین پولار بادی اندازه گیری و هم چنین درصد رسیدن جنین های دو سلولی به مرحله کلیواژ و بلاستوسیت نیز به عنوان نشانه ای از میزان شایستگی توسعه اولیه ج...

Effect of aging on Phosphorus removal of metallurgical slag and heat reactivation of aged slag

In order to examine the effect of ageing on P removal capacity, the phosphorus (P) removal capacity of three types of slag, argon oxygen decarburisation slag (AOD), blast furnace slag (BFS) and electric arc furnace slag (EAF), was examined after 0, 10, 13 and 19 months in batch experiments. The results showed that ageing reduced P removal capacity, e.g. by 78.4% for 19-month-old AOD slag. For B...

متن کامل

Effect of Additives on Melting Point and Viscosity of RH Refining Slag

To get suitable ladle slag which can avoid slag sticking onto the RH immersion tube during RH refining process of IF steel, the effect of composition on melting point and viscosity of RH refining ladle slag was studied by different additives which is based on CaO. The results of melting point and viscosity testing experiments indicates that, the melting point and viscosity of RH refining ladle ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of iron & steel society of iran

ناشر: iron & steel society of iran

ISSN 1735-4145

دوره 2

شماره 1 2005

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023