synthesis of carbon nano structures on fe/cu/ai and al/steel by thermal chemical vapour deposition method

نویسندگان

f. bisepar

z. haghparast

s. a. khorrami

s. moradi

r. cheraghali

چکیده

using c2h2, 112 and as gases at 550'c, carbon nanotubes were fabricated on the surfaces of twosubstrates coated by nano thin layers of metal catalysts by dc magnetron sputtering. aystamless steel andfe/cteal, by thermal chemical vapor deposition (tcvd) the surface properties of the substrates wereparticularly investigated, and the effect of treatment of the substrates on the cnt's growth is criticallyanalyzed. it was found that carbon nanotubes (cnts) formation significantly depends on substrates andcatalysts. gnps with nano helical( spiral, nano rope struchtres and small amount of amorphous carbon aresuccessfully grown on fe/cu/al. cnts with nano wall structure gown on al/steel. the details ofmorphology of carbon nanotubes are discussed through scanning electron microscope (sem) and romanspectroscopy. the surface roughness of the deposited of fe/cu bilayer and al as catalysts are discussedthrough atomic force microscope (afm).

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of carbon nano structures on Fe/Cu/AI and Al/Steel by thermal chemical vapour deposition method

Using C2H2, 112 and As gases at 550'C, carbon nanotubes were fabricated on the surfaces of twosubstrates coated by nano thin layers of metal catalysts by DC magnetron sputtering. AYStamless steel andFe/CteAl, by thermal chemical vapor deposition (TCVD) The surface properties of the substrates wereparticularly investigated, and the effect of treatment of the substrates on the CNT's growth is cri...

متن کامل

Growth of carbon nanostructures upon stainless steel and brass by thermal chemical vapor deposition method

The lack of complete understanding of the substrate effects on carbon nanotubes (CNTs) growth poses a lot oftechnical challenges. Here, we report the direct growth of nanostructures such as the CNTs on stainless steel 304and brass substrates using thermal chemical vapor deposition (TCVD) process with C2H2 gas as carbon sourceand hydrogen as supporting gas mixed in Ar gas flow. We used an especi...

متن کامل

Studies on Synthesis of Single-Walled Carbon Nanotubes by Gas-Phase Chemical Vapour Deposition

..................................................................................................... 3 Preface ........................................................................................................ 4 List of publications ................................................................................. 5 List of symbols and acronyms ...............................................

متن کامل

Synthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler

Boron included aluminium nitride (B-AlN) thin films were synthesized on silicon (Si) substrates through chemical vapour deposition ( CVD ) at 773 K (500 °C). tert-buthylamine (tBuNH2) solution was used as nitrogen source and delivered through gas bubbler. B-AlN thin films were prepared on Si-100 substrates by varying gas mixture ratio of three precursors. The structural properties of the films ...

متن کامل

Gold catalytic Growth of Germanium Nanowires by chemical vapour deposition method

Germanium nanowires (GeNWs) were synthesized using chemical vapor deposition (CVD) based on vapor–liquid–solid (VLS) mechanism with Au nanoparticles as catalyst and germanium tetrachloride (GeCl4) as a precursor of germanium. Au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in Au colloidal s...

متن کامل

Synthesis of Tin Nitride SnxNyNanowires by Chemical Vapour Deposition

Tin nitride (Sn(x)N(y)) nanowires have been grown for the first time by chemical vapour deposition on n-type Si(111) and in particular by nitridation of Sn containing NH(4)Cl at 450 degrees C under a steady flow of NH(3). The Sn(x)N(y) nanowires have an average diameter of 200 nm and lengths >/=5 mum and were grown on Si(111) coated with a few nm's of Au. Nitridation of Sn alone, under a flow o...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of physical & theoretical chemistry

ISSN

دوره 6

شماره 3 2009

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023