robust model- based fault detection and isolation for v47/660kw wind turbine

نویسندگان

sh. asgari

a. yazdizadeh

m. g. kazemi

چکیده

in this paper, in order to increase the efficiency, to reduce the cost and to prevent the failures of wind turbines, which lead to an extensive break down, a robust fault diagnosis system is proposed for v47/660kw wind turbine operated in manjil wind farm, gilan province, iran. according to the acquired data from iran wind turbine industry, common faults of the wind turbine such as sensor faults, actuator faults and component faults are identified and considered in fault detection and isolation (fdi) system design. various faults in abrupt and incipient natures can be detected and isolated using the indicators of faults, namely residuals, that are derived based on unknown input observer (uio) approach. moreover, some thresholds are exploited to evaluate the produced residuals. the robustness of the proposed method against parameter uncertainties is shown as well. simulations are performed in matlab/simulink environment to demonstrate the effectiveness of the proposed method using the actual parameters derived from the turbine model.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Robust Model- Based Fault Detection and Isolation for V47/660kW Wind Turbine

In this paper, in order to increase the efficiency, to reduce the cost and to prevent the failures of wind turbines, which lead to an extensive break down, a robust fault diagnosis system is proposed for V47/660kW wind turbine operated in Manjil wind farm, Gilan province, Iran. According to the acquired data from Iran wind turbine industry, common faults of the wind turbine such as sensor fault...

متن کامل

Wavelet based Fault Detection for Wind Turbine

Renewable energy sources are gaining high prominence in today’s world. However, these sources do not supply energy throughout the year and hence efficiency is required when extracting energy from them. Wind energy is a recently developing area of common interest. Efficiency of a wind turbine is however, very low. Hence, detection of fault in the system becomes very essential so as to increase t...

متن کامل

Identification and Robust Fault Detection of Industrial Gas Turbine Prototype Using LLNF Model

In this study, detection and identification of common faults in industrial gas turbines is investigated. We propose a model-based robust fault detection(FD) method based on multiple models. For residual generation a bank of Local Linear Neuro-Fuzzy (LLNF) models is used. Moreover, in fault detection step, a passive approach based on adaptive threshold is employed. To achieve this purpose, the a...

متن کامل

Wind Turbine Fault Detection Using Counter-Based Residual Thresholding ⋆

Up-down counters are commonly used in the aerospace industry for fault detection thresholding. This paper applies the up-down counter technique to detect wind turbine faults. The thresholding problem involves a tradeoff between false alarms and missed detections. Counter based thresholding can detect smaller faults with higher probability and lower false alarms than is possible using simple con...

متن کامل

Robust Fault Diagnosis for a Horizontal Axis Wind Turbine

This paper presents an H optimization-based approach for the detection and isolation of faults in a horizontal axis wind turbine. The primary residuals are generated from separate parity equations for each of the blade pitch and drivetrain subsystems. Then, a robust secondary residual filtering scheme is developed to remove undesirable cross coupling in fault-residual pairings while suppressin...

متن کامل

Fault detection and isolation for a wind turbine benchmark using a mixed Bayesian/Set-membership approach

This paper addresses the problem of fault detection and isolation of wind turbines using a mixed Bayesian/Setmembership approach. Modeling errors are assumed to be unknown but bounded, following the set-membership approach. On the other hand, measurement noise is also assumed to be bounded, but following a statistical distribution inside the bounds. To avoid false alarms, the fault detection pr...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
amirkabir international journal of modeling, identification, simulation & control

ناشر: amirkabir university of technology

ISSN 2008-6067

دوره 45

شماره 1 2015

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023