prediction of heat transfer coefficient for thermal regenerators
نویسندگان
چکیده
correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. the experimental results have been correlated by the least square regression has been obtained.the present correlation has been compared with the heat transfer coefficient correlations in the literature.
منابع مشابه
Prediction of Heat Transfer Coefficient for Thermal Regenerators
Correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. The experimental results have been correlated by the least square regression has been obtained.The present correlation has been compared with the heat transfer coefficient correlations in the literature.
متن کاملDependency of thermal spreading resistance on convective heat transfer coefficient
This paper presents a study of the thermal spreading resistance Rth of a small heat source on a conductive substrate subject to bottomside convective cooling. This problem has been investigated for a very long time and is well covered in the literature. However, instead of using the design curves found in many papers, the results are presented as function of the heat transfer coefficient h. Doi...
متن کاملApplication of ZnO/TiO2 Nanocomposite for the Improvement of Heat Transfer Coefficient in Tube Heat Exchangers
The potential of nanofluids for the improvement of heat transfer coefficient in various heat exchangeequipment has been considered and studied as a major application during recent decades. In this research,heat transfer coefficient of ZnO, TiO2 and ZnO/TiO2 nanofluids in a shell and tube heat exchanger has beenstudied experimentally. ZnO nanoparticle was synthesized through pre...
متن کاملInvestigation of Heat Transfer Coefficient Enhancement for CuO/TiO2 Nanocomposite in a Tube Heat Exchanger
In order to improve the efficiency and rate of heat transfer in heat exchangers, various techniques such as increasing the heat transfer coefficient are proposed. This study is devoted to the investigation of heat transfer coefficient variations due to the addition of CuO, TiO2 and CuO/TiO2 nanoparticles into a shell and tube heat exchanger. CuO/TiO2 nanocomposite was synthesized using mechanic...
متن کاملThermal Bridges Dynamic Simulation And Heat Transfer Coefficient Value For Specific Thermal Bridges
A thermal bridge is a part of the building envelope where the otherwise uniform thermal resistance is significantly changed by: • Full or partial penetration of the building envelope by materials with a different thermal conductivity and/or • A change in thickness of the structure and/or • A difference between internal and external areas, such as occur at wall-floor-ceiling junctions. INTRODUCT...
متن کاملCalculation of Heat Transfer Coefficient of MWCNT-TiO2 Nanofluid in Plate Heat Exchanger
The objective of the present study is the synthesis of MWCNT-TiO2 hybrid nanostructures by solvothermal synthesis method with TiCl4 as precursor. The heat transfer enhancement due to the use of MWCNT-TiO2 nanofluid was investigated. As-prepared hybrid materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that MWCNTs were uniformly dec...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)ناشر: iranian institute of research and development in chemical industries (irdci)-acecr
ISSN 1021-9986
دوره 16
شماره 2 1997
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023