adsorptive removal of al, zn, fe, cr and pb from hydrogen peroxide solution by ir-120 cation exchange resin

نویسندگان

shahram ghanbari pakdehi

چکیده

adsorption of cations al, zn, fe, cr and pb from aqueous solution of hydrogen peroxide using ir-120 cation-exchange resin was studied. the removal percentage of the cations was examined by varying experimental conditions (such as ph of the hydrogen peroxide solution, temperature, contact time and dosage of adsorbent) in a stirred-batch system. under the optimal conditions (ph=1, t=25oc, contact time=150 min, adsorbent dosage=5g), it was found that more than 98% removal was achieved. the cations adsorption was studied on the basis of langmuir, freundlich and linear isotherms in the concentration range of 0-50 mg/l. adsorption of the cations on the resin followed first-order, pseudo-first-order (lagergren) and intraparticle diffusion kinetic models in the cations range of 10-20 mg/l. the best fitted model for kinetic model was obtained as lagergren model. the obtained studies showed that ir-120 cation-exchange resin was successfully used as an efficient adsorbent for removal of the cations from aqueous solution of hydrogen peroxide.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adsorptive Removal of Al, Zn, Fe, Cr and Pb from Hydrogen Peroxide Solution by IR-120 Cation Exchange Resin

  Adsorption of cations Al, Zn, Fe, Cr and Pb from aqueous solution of hydrogen peroxide using IR-120 cation-exchange resin was studied. The removal percentage of the cations was examined by varying experimental conditions (such as pH of the hydrogen peroxide solution, temperature, contact time and dosage of adsorbent) i...

متن کامل

Adsorption of Cr(III) and Mg(II) from Hydrogen Peroxide Aqueous Solution by Amberlite IR-120 Synthetic Resin

In concentration of hydrogen peroxide, first, the solution should be quite pure, and then, it concentrate with methods such as vacuum distillation and cooling crystallization, because impurities in the hydrogen peroxide solution in high concentrations are causing decomposition of this substance; that is very dangerous. The purpose of this article is separation of chromium and magne...

متن کامل

adsorption of cr(iii) and mg(ii) from hydrogen peroxide aqueous solution by amberlite ir-120 synthetic resin

in concentration of hydrogen peroxide, first, the solution should be quite pure, and then, it concentrate with methods such as vacuum distillation and cooling crystallization, because impurities in the hydrogen peroxide solution in high concentrations are causing decomposition of this substance; that is very dangerous. the purpose of this article is separation of chromium and magnesium cations ...

متن کامل

جداسازی کاتیون‌ها از محلول پراکسید هیدروژن و بررسی مدلهای جذب سطحی با استفاده از کاتیون کروم (Cr+3)

  Concentration of hydrogen peroxide to military grade (about 98 wt%) needs removal of impurities from hydrogen peroxide of commercial grade. In this research, separation of metallic impurities from hydrogen peroxide solution was studied and cations as Al, Fe, Pb, Zn and Cr were separated from commercial hydrogen peroxide using Amberlite IR-120 (strong cationic resin). The cations were separate...

متن کامل

Lead removal from aqueous solution using ostrich feathers modified by hydrogen peroxide

Introduction: Lead is the major toxicant found in industrial effluent that can adversely affect environment and human health. Conventional methods for the removal of this metal from waste waters are often cost prohibitive. This study was conducted to investigate the effect ostrich feathers modified by hydrogen peroxide on lead removal from waste water. Methods: In this descriptive and practical...

متن کامل

Removal of Chromium(III) from the Waste Solution of an Indian Tannery by Amberlite IR 120 Resin

The extraction of chromium(III) from a model waste solution and also from a waste solution of an Indian tannery with Amberlite IR 120 resin is described, and the performance of this resin is compared with other similar resins. The parameters that were optimized include effect of mixing time, pH, loading and elution behaviours of chromium(III) for this resin. Sorption of chromium(III) on Amberli...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 35

شماره 1 2016

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023