combustion modeling for modern direct injection diesel engines

نویسندگان

samad jafarmadar

alborz zehni

چکیده

in order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. in this field, computational tools like cfd and engine cycle simulation play a fundamental role. therefore, the goal of the present work is to simulate a high speed di diesel engine and study the combustion and major diesel engine emissions with more details, by using the avl-fire commercial cfd code. the predicted values of the in cylinder pressure,  heat release rate, emissions, spray penetration and in-cylinder isothermal contour plots by this code are compared with the corresponding experimental data in the literature and is derived good agreement. this agreement makes the model a reliable tool that can use for exploring new engine concepts.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Combustion Modeling for Modern Direct Injection Diesel Engines

In order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. In this field, computational tools like CFD and engine cycle simulation play a fundamental role. Therefore, the goal of the present work is to simulate a high speed DI diesel engine and study the combustion and major diesel engine emissions with more deta...

متن کامل

Modeling of Heat Losses Within Combustion Chamber of Diesel Engines

The cylinder working fluid mean temperature, rate of heat fluxes to combustion chamber and temperature distribution on combustion chamber surface will be calculated in this research. By simulating thermodynamic cycle of engine, temperature distribution of combustion chamber will be calculated by the Crank-Nicolson method. An implicit finite difference method was used in this code. Special treat...

متن کامل

Combustion Control of Diesel Engines Using Injection Timing

We propose a model-based control strategy to adapt the injection settings according to the airpath dynamics of a conventional Diesel engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the middle of combustion. For that purpose, start of injection is adjusted based on a combustion model and intake manifold conditions. In particular, no...

متن کامل

Three-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine

This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...

متن کامل

Multi-Dimensional Modeling of the Effects of Split Injection Scheme on Combustion and Emissions of Direct-Injection Diesel Engines at Full Load State

One of the important problems in reducing pollutant emission from diesel engines is trade-off between soot and NOx. Split injection is one of the most powerful tools that decrease soot and NOx emissions simultaneously. At the present work, the effect of split injection on the combustion process and emissions of a direct-injection diesel engine under full-load conditions is investigated by the c...

متن کامل

Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine

When looking at the effects of diesel engine exhaust on the environment, it is important to first look at the composition of the exhaust gases. Over 99.5% of the exhaust gases are a  combination of  nitrogen, oxygen, carbon dioxide, and water. With the exception of carbon  dioxide, which contributes about  5% of the total volume, the diesel engine exhaust consists of  elements which are part of...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 31

شماره 3 2012

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023