numerical modelling of porous radiant burners using full and reduced kinetics mechanisms

نویسندگان

mostafa khosravy el-hossaini

mehdi maerefat

kiumars mazaheri

چکیده

the present paper compares full kinetics mechanisms in numerical modelling of porous radiant burners (prb), with their reduced forms. the two most frequently used mechanisms of methane combustion (gri3.0 and miller) were selected and their effects were examined on temperature, species concentration, burning speed, and pollutant emission. while the findings of numerical simulation of prb show fine concurrence between each full mechanism and its related reduced mechanism, no significant temperature differences are observed in the results of full mechanisms. however, co concentration along burner axis shows a small difference between two full mechanisms, which is related to hco and ho2 concentrations. the inconsistency is more pronounced for no concentration along porous axis, which is due to prompt no evaluation. the present research finds deviation also between burning speeds, calculated by numerical simulation and experimental results. this difference is much more significant in rich mixtures. gri3.0 mechanism estimated the burning velocities as closer to the experimental values than those predicted using miller mechanism.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Modelling of Porous Radiant Burners Using Full and Reduced Kinetics Mechanisms

The present paper compares full kinetics mechanisms in numerical modelling of porous radiant burners (PRB), with their reduced forms. The two most frequently used mechanisms of methane combustion (GRI3.0 and Miller) were selected and their effects were examined on temperature, species concentration, burning speed, and pollutant emission. While the findings of numerical simulation of PRB sho...

متن کامل

Heat Transfer Characteristics of Porous Radiant Burners Using Discrete-Ordinate Method (S2-Approximation)

This paper describes a theoretical study to investigate the heat transfer characteristics of porous radiant burners. A one dimensional model is used to solve the governing equations for porous medium and gas flow before the premixed flame to the exhaust gas. Combustion in the porous medium is modeled as a spatially dependent heat generation zone. The homogeneous porous media, in addition to its...

متن کامل

Performance Tests on Medium-Scale Porous Radiant Burners for LPG Cooking Applications

The principle of operation of the porous radiant burner (PRB) is based on porous medium combustion (PMC) in which the combustion of fuel and air mixture takes place inside a matrix of open cavities in the presence of an inert solid surface. Since the porous matrix has high thermal conductivity and high emissivity, the contributions of conduction and radiation in the PMC are significant. In the ...

متن کامل

Development of Reduced Mechanisms for Numerical Modelling of Turbulent Combustion

Recent advances in automation of systematically reduced mechanisms are reported here with the aim to accelerate the development process. A computer algorithm has been developed enabling fast generation and testing of reduced chemistry. This algorithm has been used to develop various reduced mechanisms of methane-air combustion for modelling of turbulent combustion. A 10-step reduced chemistry h...

متن کامل

Two-dimensional Numerical Simulation of Combustion and Heat Transfer in Porous Burners

this study, combustion in a 5kW porous burner is simulated. The two dimensional Navier-Stokes, the energy and the chemical species transport equations are solved and a multistep kinetics mechanism (5 reactions and 7 species) is employed. Finite volume method is used for simulation. Thermal nonequilibrium is accounted for gas and solid temperature and radiation heat transfer is considered for so...

متن کامل

Reduced-order modelling numerical homogenization.

A general framework to combine numerical homogenization and reduced-order modelling techniques for partial differential equations (PDEs) with multiple scales is described. Numerical homogenization methods are usually efficient to approximate the effective solution of PDEs with multiple scales. However, classical numerical homogenization techniques require the numerical solution of a large numbe...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
iranian journal of chemistry and chemical engineering (ijcce)

ناشر: iranian institute of research and development in chemical industries (irdci)-acecr

ISSN 1021-9986

دوره 27

شماره 1 2008

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023