an experimental study on toughening mechanisms of fillers in epoxy/ silica nanocomposites

نویسندگان

m. shariati

g. a. farzi

a. dadrasi

m. amiri

r. rashidi meybodi

چکیده

in this paper, a systematic study on the effects of particle size and hybrid of two different size of silica nanoparticles on the toughening mechanisms of bisphenol-a epoxy was conducted. nanosilica particles with mean diameter of 17 nm and 65 nm were blended into epoxy system. probable synergy effects of these two nanoparticles on young’s modulus and yield strength have been investigated. results showed that the addition of the silica nanoparticles and also increasing content of nanoparticles improved young’s modulus in all composites. in addition, the particle size did not show a considerable effect on the young’s modulus and the use of both types of particles in a composite showed negligible synergy effect. on the other hands, results revealed that the addition of these nanoparticles did not change the yield stress of composites significantly. the fracture surfaces of composites were studied by scanning electron microscopy. it was revealed that in all three series of nanocomposites, crack deflection, crack forking and debonding were the most important mechanisms.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Experimental Study on Toughening Mechanisms of Fillers in Epoxy/ Silica Nanocomposites

In this paper, a systematic study on the effects of particle size and hybrid of two different size of silica nanoparticles on the toughening mechanisms of bisphenol-A epoxy was conducted. Nanosilica particles with mean diameter of 17 nm and 65 nm were blended into epoxy system. Probable synergy effects of these two nanoparticles on Young’s modulus and yield strength have been investigated. ...

متن کامل

Heterogeneity in epoxy nanocomposites initiates crazing: significant improvements in fatigue resistance and toughening.

Crazing is a failure mode of bulk polymers and occurs under predominant uniaxial tensile load when the bulk eventually forms denser ligaments (or fibrils) while preserving its continuity. The bridging of cracks by such fibrils is an importantmechanism for energy dissipation and toughening in thermoplastic polymers. However, craze phenomena are not observed in thermosetting polymers such as epox...

متن کامل

improving fracture toughness of epoxy nanocomposites by silica nanoparticles

an epoxy resin was modified by silica nanoparticles and cured with an anhydride. the particles with different batches of 12, 20, and 40 nm sizes were each distributed into the epoxy resin ultrasonically. electron microscopy images showed that the silica particles were well dispersed throughout the resin. tensile test results showed that young’s modulus and tensile strength increased with the vo...

متن کامل

Enhancement of Fracture Toughness of Epoxy Nanocomposites by Combining Nanotubes and Nanosheets as Fillers

In this work the fracture toughness of epoxy resin has been improved through the addition of low loading of single part and hybrid nanofiller materials. Functionalised multi-walled carbon nanotubes (f-MWCNTs) was used as single filler, increased the critical strain energy release rate, GIC, by 57% compared to the neat epoxy, at only 0.1 wt% filler content. Importantly, no degradation in the ten...

متن کامل

Electrically conductive epoxy nanocomposites containing carbonaceous fillers and in-situ generated silver nanoparticles

An epoxy resin was nanomodified with in-situ generated silver nanoparticles (Ag) and with various amounts of carbon black (CB) and carbon nanofibers (NF), in order to increase the electrical conductivity of the matrix. Differential scanning calorimetry tests revealed how the addition of both CB and NF led to a slight decrease of the glass transition temperature of the material, while electron m...

متن کامل

Fracture Toughness and Elastic Modulus of Epoxy-Based Nanocomposites with Dopamine-Modified Nano-Fillers

This paper examines the effect of surface treatment and filler shape factor on the fracture toughness and elastic modulus of epoxy-based nanocomposite. Two forms of nanofillers, polydopamine-coated montmorillonite clay (D-clay) and polydopamine-coated carbon nanofibres (D-CNF) were investigated. It was found that Young's modulus increases with increasing D-clay and D-CNF loading. However, the f...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
international journal of nanoscience and nanotechnology

ناشر: iranian nano society

ISSN 1735-7004

دوره 11

شماره 3 2015

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023