numerical analysis of cyclic behavior of beam-to-column bolted connections in steel frames

نویسندگان

morteza rastian

asghar vatani oskouieb

hassan aghabaratic

چکیده

this article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. as the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. four different specimens have been analyzed. these models had some differences such as bolt arrangement and the presence or absence of end-plate stiffeners. design of bolts arrangement and stiffeners have been done based on the aisc standards. two vertical bolt arrangements, with or without stiffener and two other models with horizontal bolt arrangement, with or without stiffeners have been considered. different aspects such as energy absorption, ductility, initial stiffness and effective stiffness for all specimens have been compared. finally effect of pre-stressing of all specimens has been assessed. as a result, comparison between vertical bolt arrangement and horizontal bolt arrangement has shown that the vertical bolt arrangement is more advantageous, especially in energy absorption

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames

This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...

متن کامل

The Behavior of Type of RC Column-to-Steel Beam Connections and Scrutiny Of Behavior Coefficients

(RCS) frames which are systems that dwell of concrete columns and steel beams , by optimizing the act of compressive strength of concrete and bending strength of steel due to not only a decrease in building weight in comparison to concrete structures but also having a better action in long spans frames . In this paper for analysis RCS behavior, a category of nonlinear Push Over analyses were ...

متن کامل

The Behavior of Type of RC Column-to-Steel Beam Connections and Scrutiny Of Behavior Coefficients

(RCS) frames which are systems that dwell of concrete columns and steel beams , by optimizing the act of compressive strength of concrete and bending strength of steel due to not only a decrease in building weight in comparison to concrete structures but also having a better action in long spans frames . In this paper for analysis RCS behavior, a category of nonlinear Push Over analyses were ...

متن کامل

Numerical study on the behavior of link-to-column connections in eccentrically braced frames

Geometry of eccentrically braced frames (EBFs) in some cases causes the connection of link beam to the column. The details of such conditions should be studied carefully due to the full plastic rotation in the link beam. In this research, the behavior of link-to-column connection is modeled and the failure modes are considered. Based on the previous researches shear link can exhibit better beha...

متن کامل

A Study on the Ductility of Bolted Beam - Column Connections

The behaviour of beam-column joint plays an important role in the response of a steel moment resisting framed structure especially under seismic excitation. Semi rigid connections like bolted joints, allow better energy dissipation and provide good response under lateral loads. In this paper the ductility and energy dissipation characteristics of semi rigid bolted connections using double web a...

متن کامل

The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections

This study focuses on performance of H-shaped steel beams to CFT column rigid connections. To this end, the effects of internal and external stiffeners on hysteretic behavior of connections were studied. Comparative numerical analyses carried out on eight different connections. To this end finite element models were prepared using ANSYS and nonlinear cyclic analyses carried out. Results of this...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of structural engineering and geo-techniques

ناشر: civil engineering & construction research center (ccrc), qiau

ISSN

دوره 5

شماره 1 2015

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023