Formation of perfect ohmic contact at indium tin oxide/N,N′-di(naphthalene-1-yl)-N,N′-diphenyl-benzidine interface using ReO3
نویسندگان
چکیده
A perfect ohmic contact is formed at the interface of indium tin oxide (ITO) and N,N'-di(naphthalene-1-yl)-N,N'-diphenyl-benzidine (NPB) using ReO3 as the interfacial layer. The hole injection efficiency is close to 100% at the interface, which is much higher than those for interfacial layers of 1,4,5,8,9,11-hexaazatripheylene hexacarbonitrile (HAT-CN) and MoO3. Interestingly, the ReO3 and MoO3 interfacial layers result in the same hole injection barrier, ≈0.4 eV, to NPB, indicating that the Fermi level is pinned to the NPB polaron energy level. However, a significant difference is observed in the generated charge density in the NPB layer near the interfacial layer/NPB interface, indicating that charge generation at the interface plays an important role in forming the ohmic contact.
منابع مشابه
Improved performance of organic light-emitting diodes with MoO3 interlayer by oblique angle deposition.
We fabricated and demonstrated improved organic light emitting diodes (OLEDs) in a thin film architecture of indium tin oxide (ITO)/ molybdenum trioxide (MoO3) (20 nm)/N,N'-Di(naphth-2-yl)-N,N'-diphenyl-benzidine (NPB) (50 nm)/ tris-(8-hydroxyquinoline) (Alq3) (70 nm)/Mg:Ag (200 nm) using an oblique angle deposition technique by which MoO3 was deposited at oblique angles (θ) with respect to the...
متن کاملGreen Fluorescent Organic Light Emitting Device with High Luminance
In this work, we fabricated the small molecule green fluorescent bottom-emission organic light emitting device (OLED) with the configuration of glass substrate/indium tin oxide (ITO)/Copper Phthalocyanine (CuPc) 25 nm/ N,N’-di(naphthalen-1-yl)-N,N’-diphenyl-benzidine (NPB) 45 nm/ tris(8-hydroxyquinoline) aluminium (Alq3) 60 nm/ Lithium fluoride (LiF) 1 nm/Aluminum (Al) 100 nm where CuPc and NPB...
متن کاملHighly efficient blue organic light-emitting diodes using quantum well-like multiple emissive layer structure
In this study, the properties of blue organic light-emitting diodes (OLEDs), employing quantum well-like structure (QWS) that includes four different blue emissive materials of 4,4'-bis(2,2'-diphenylyinyl)-1,1'-biphenyl (DPVBi), 9,10-di(naphth-2-yl)anthracene (ADN), 2-(N,N-diphenyl-amino)-6-[4-(N,N-diphenyl amine)styryl]naphthalene (DPASN), and bis(2-methyl-8-quinolinolate)-4-(phenyl phenolato)...
متن کاملElectron blocking and hole injection: The role of N,N8-Bis„naphthalen-1-y...- N,N8-bis„phenyl...benzidine in organic light-emitting devices
The current density-luminance-voltage characteristics of organic light-emitting devices ~OLEDs! with N ,N8-Bis~naphthalen-1-yl)-N ,N8-bis~phenyl! benzidine ~NPB! of various thicknesses as the hole transport layer have been investigated. It is found that for conventional structures of indium– tin–oxide/NPB/tris~8-hydroxyquinoline! aluminum (Alq3) ~60 nm!/LiF ~0.5 nm!/Al the optimal hole injectio...
متن کاملNovel hole transporting materials based on 4-(9H-carbazol-9-yl)triphenylamine derivatives for OLEDs.
During the past few years, organic light emitting diodes (OLEDs) have been increasingly studied due to their emerging applicability. However, some of the properties of existing OLEDs could be improved, such as their overall efficiency and durability; these aspects have been addressed in the current study. A series of novel hole-transporting materials (HTMs) 3a-c based on 4-(9H-carbazol-9-yl)tri...
متن کامل