Highly stretchable and shape-controllable three-dimensional antenna fabricated by “Cut-Transfer-Release” method
نویسندگان
چکیده
Recent progresses on the Kirigami-inspired method provide a new idea to assemble three-dimensional (3D) functional structures with conventional materials by releasing the prestrained elastomeric substrates. In this paper, highly stretchable serpentine-like antenna is fabricated by a simple and quick "Cut-Transfer-Release" method for assembling stretchable 3D functional structures on an elastomeric substrate with a controlled shape. The mechanical reliability of the serpentine-like 3D stretchable antenna is evaluated by the finite element method and experiments. The antenna shows consistent radio frequency performance with center frequency at 5.6 GHz during stretching up to 200%. The 3D structure is also able to eliminate the hand effect observed commonly in the conventional antenna. This work is expected to spur the applications of novel 3D structures in the stretchable electronics.
منابع مشابه
Thermal Release Transfer Printing for Stretchable Conformal Bioelectronics
Soft neural electrode arrays that are mechanically matched between neural tissues and electrodes offer valuable opportunities for the development of disease diagnose and brain computer interface systems. Here, a thermal release transfer printing method for fabrication of stretchable bioelectronics, such as soft neural electrode arrays, is presented. Due to the large, switchable and irreversible...
متن کاملHighly Omnidirectional and Frequency Controllable Carbon/Polyaniline-based 2D and 3D Monopole Antenna
Highly omnidirectional and frequency controllable carbon/polyaniline (C/PANI)-based, two- (2D) and three-dimensional (3D) monopole antennas were fabricated using screen-printing and a one-step, dimensionally confined hydrothermal strategy, respectively. Solvated C/PANI was synthesized by low-temperature interfacial polymerization, during which strong π-π interactions between graphene and the qu...
متن کاملControlled 3D buckling of silicon nanowires for stretchable electronics.
Silicon (Si) nanowire (NW) coils were fabricated on elastomeric substrates by a controlled buckling process. Si NWs were first transferred onto prestrained and ultraviolet/ozone (UVO)-treated poly(dimethylsiloxane) (PDMS) substrates and buckled upon release of the prestrain. Two buckling modes (the in-plane wavy mode and the three-dimensional coiled mode) were found; a transition between them w...
متن کاملMechanical Buckling Analysis of Composite Annular Sector Plate with Bean-Shaped Cut-Out using Three Dimensional Finite Element Method
In this paper, mechanical buckling analysis of composite annular sector plates with bean shape cut out is studied. Composite material sector plate made of Glass-Epoxy and Graphite-Epoxy with eight layers with same thickness but different fiber angles for each layer. Mechanical loading to form of uniform pressure loading in radial, environmental and biaxial directions is assumed. The method used...
متن کاملThree-dimensional highly conductive silver nanowires sponges based on cotton-templated porous structures for stretchable conductors
A stretchable cotton–Ag nanowire–poly(dimethylsiloxane) (cotton–AgNWs–PDMS) conductor was fabricated by embedding the unique binary conductive network structure of cotton–AgNWs in PDMS through a simple dip-coating method. The binary conductive network structure was constructed based on cotton which had an interconnected and junction-free macroporous structure as the skeleton to support the two ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 7 شماره
صفحات -
تاریخ انتشار 2017