Optimal Placement of Processors based on Effective Communication Load

نویسندگان

  • A. R. Aswatha
  • T. Basavaraju
  • N. Bhaskara Rao
چکیده

This paper presents a new technique for the optimum placement of processors to minimize the total effective communication load under multi-processor communication dominated environment. This is achieved by placing heavily loaded processors near each other and lightly loaded ones far away from one another in the physical grid locations. The results are mathematically proved for the Algorithms are described. Keywords—Ascending Sort Index Vector, Effective Communication Load, Effective Distance Matrix, Optimal Placement, Sorting Order.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Lower Bounds on Communication Loads and Optimal Placements in Torus Networks

ÐFully populated torus-connected networks, where every node has a processor attached, do not scale well since load on edges increases superlinearly with network size under heavy communication, resulting in a degradation in network throughput. In a partially populated network, processors occupy a subset of available nodes and a routing algorithm is specified among the processors placed. Analogou...

متن کامل

Optimal Placement and Sizing of Multiple Renewable Distributed Generation Units Considering Load Variations Via Dragonfly Optimization Algorithm

The progression towards smart grids, integrating renewable energy resources, has increased the integration of distributed generators (DGs) into power distribution networks. However, several economic and technical challenges can result from the unsuitable incorporation of DGs in existing distribution networks. Therefore, optimal placement and sizing of DGs are of paramount importance to improve ...

متن کامل

Economic Evaluation of Optimal Capacitor Placement in Reconfiguration Distribution System Using Genetic Algorithm

Optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. The distribution system operator calculates the optimal place, number and capacity of capacitors based on two major purposes: active power loss reduction and return on invest...

متن کامل

Optimal Placement of DGs in Distribution System including Different Load Models for Loss Reduction using Genetic Algorithm

Distributed generation (DG) sources are becoming more prominent in distribution systems due to the incremental demands for electrical energy. Locations and capacities of DG sources have great impacts on the system losses in a distribution network. This paper presents a study aimed for optimally determining the size and location of distributed generation units in distribution systems with differ...

متن کامل

Optimal Placement and Sizing of Distributed Generations in Unbalanced Distribution Networks Considering Load Models and Uncertainties

Development of distributed generations’ technology, trends in the use of these sources to improve some of the problems such as high losses, low reliability, low power quality and high costs in distributed networks. Choose the correct location to install and proper capacity of these sources, such as important things that must be considered in their use. Since distribution networks are actu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012