Identification of points using disks
نویسندگان
چکیده
We consider the problem of identifying n points in the plane using disks, i.e., minimizing the number of disks so that each point is contained in a disk and no two points are in exactly the same set of disks. This problem can be seen as an instance of the test covering problem with geometric constraints on the tests. We give tight lower and upper bounds on the number of disks needed to identify any set of n points of the plane. In particular, we prove that if there are no three colinear points nor four cocyclic points, then 2⌈n/6⌉ + 1 disks are enough, improving the known bound of ⌈(n + 1)/2⌉ when we only require that no three points are colinear. We also consider complexity issues when the radius of the disks is fixed, proving that this problem is NP-complete. In contrast, we give a linear-time algorithm computing the exact number of disks if the points are colinear.
منابع مشابه
(n,1,1,α)-Center Problem
Given a set of points in the plane and a constant ,-center problem is to find two closed disks which each covers the whole , the diameter of the bigger one is minimized, and the distance of the two centers is at least . Constrained -center problem is the -center problem in which the centers are forced to lie on a given line . In this paper, we first introduce -center problem and its constrain...
متن کاملIdentification areas with inundation potential for urban runoff harvesting using the support vector machine model
Rainfall-runoff from urban areas is one of the available water resources, which is wasted due to lack of attention and proper management. Besides, urban runoff excess of drains capacity causing many problems including inundation and urban environmental pollution. Therefore, harvesting this runoff can provide a part of the required water in urban areas, and also reduce flood and urban inund...
متن کاملIdentification of Safe Assembly Points in Emergencies in a Gas Refinery of the South Pars Gas Complex Using Fuzzy Logic Model
INTRODUCTION: Crisis management is of critical importance in the oil and gas industries due to the increasing occurrence of accidents in these areas. One of the most important issues regarding crisis management in such industries is the identification of safety assembly points where employees should gather in emergencies. This study aimed to identify the safe points in a refinery using geo...
متن کاملMHD Flow and Heat Transfer Analysis of Micropolar Fluid through a Porous Medium between Two Stretchable Disks Using Quasi-Linearization Method
In this paper, a comprehensive numerical study is presented for studying the MHD flow and heat transfer characteristics of non-Newtonian micropolar fluid through a porous medium between two stretchable porous disks. The system of governing equations is converted into coupled nonlinear ordinary ones through a similarity transformation, which is then solved using Quasi-linearization ...
متن کاملSolid Phase Extraction of Amount Cu(II) Using C18 Disks Modified Schiff Base-Chitosan Grafted Multiwalled Carbon Nanotubes
A novel and selective method for the fast determination of trace amounts of Cu(II) ions in water samples has been developed. The procedure is based on the selective formation of Cu(II) at optimum pH by elution with organic eluents and determination by flame atomic absorption spectrometry. The method is based on complex formation on the surface of the ENVI-18 DISKTM disks modified Schiff base-ch...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1705.11116 شماره
صفحات -
تاریخ انتشار 2017