Solute Trapping and the Effects of Anti-Trapping Currents on Phase-Field Models of Coupled Thermo-Solutal Solidification

نویسندگان

  • A. M. Mullis
  • J. Rosam
چکیده

We explore how the inclusion of an anti-trapping current within a phase-field model of coupled thermo-solutal growth formulated in the thin interface limit actually affects the observed levels of solute trapping during dendritic growth. The problem is made computational tractable by the use of advanced numerical techniques including local mesh adaptivity, implicit temporal discreteization and a multigrid solver. Contrary to published results for pure solutal models we find that the inclusion of such an anti-trapping current does not lead to the recovery of the equilibrium partition coefficient, except in the limit of very slow growth. At higher growth velocities non-vanishing amounts of solute trapping are observed. * Corresponding Author, e-mail : [email protected] tel : +44-113-343-2568 fax : +44-113-343-2384

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Solute trapping and solute drag in a phase-field model of rapid solidification

During rapid solidification, solute may be incorporated into the solid phase at a concentration significantly different from that predicted by equilibrium thermodynamics. This process, known as solute trapping, leads to a progressive reduction in the concentration change across the interface as the solidification rate increases. Theoretical treatments of rapid solidification using traditional s...

متن کامل

Phase-field modelling of solute trapping during rapid solidification of a Si–As alloy

The effect of nonequilibrium solute trapping by a growing solid under rapid solidification conditions is studied using a phase-field model. Considering a continuous steady-state concentration profile across the diffuse solid-liquid interface, a new definition of the nonequilibrium partition coefficient in the phase-field context is introduced. This definition leads, in particular for high growt...

متن کامل

Phase-field modeling of binary alloy solidification with coupled heat and solute diffusion.

A phase-field model is developed for simulating quantitatively microstructural pattern formation in solidification of dilute binary alloys with coupled heat and solute diffusion. The model reduces to the sharp-interface equations in a computationally tractable thin-interface limit where (i). the width of the diffuse interface is about one order of magnitude smaller than the radius of curvature ...

متن کامل

Quantitative Phase-Field Modelling of Solidification at High Lewis Number

A phase-field model of non-isothermal solidification in dilute binary alloys is used to study the variation of growth velocity, dendrite tip radius and radius selection parameter as a function of Lewis number at fixed undercooling. By the application of advanced numerical techniques we have been able, for the first time, to extend the analysis to Lewis numbers of order 10000, which are realisti...

متن کامل

Kinetic Phase Diagrams of Ternary Al-Cu-Li System during Rapid Solidification: A Phase-Field Study

Kinetic phase diagrams in technical alloys at different solidification velocities during rapid solidification are of great importance for guiding the novel alloy preparation, but are usually absent due to extreme difficulty in performing experimental measurements. In this paper, a phase-field model with finite interface dissipation was employed to construct kinetic phase diagrams in the ternary...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010